Hi! Am Donnerstag, 21. November 2019 19:43:49 UTC+1 schrieb Tomas Espeleta: > > If you have more bits in less time (higher frequency), this approach > unfeasible... but if the clock is low enough and you don't need HDMI, you > can play with PRU1 and use 16bits + some bits of control.... >
On PRU-1 you can use 15 inputs and 16 outputs. Only on PRU-0 you can use the full set of PINS (16 IN/17 OUT). For the later case you have to build a custom SD-Slot connector. Find details at http://users.freebasic-portal.de/tjf/Projekte/libpruio/doc/html/ChaTNT.html#SecPruGpio Regards PS: Is it intentional that you exclude non-facebook-members from watching your project? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e5056e57-105c-4aaa-a561-0d728fd38a6a%40googlegroups.com.