If you have any build instructions, it would be great to post them on beagleboard.org/p.
On Sat, Nov 23, 2019 at 11:47 PM Mala Dies <fun...@gmail.com> wrote: > > Hello Again, > > Here is the link for the BBBlue and ArduCopter: https://youtu.be/cpqV8ubNuGU. > > Seth > > P.S. If you get bored, please pitch in your ideas, e.g. constructive or not! > > On Tuesday, September 3, 2019 at 1:22:58 PM UTC-5, Mala Dies wrote: >> >> Hello, >> >> I think I may have figured out my connection issues w/ GND and PRU on >> Encoder 4 on the BBBlue. >> >> Seth >> >> P.S. Time to fly! >> >> On Sunday, September 1, 2019 at 2:41:12 PM UTC-5, Mala Dies wrote: >>> >>> Hello, >>> >>> I have ArduCopter 3.6 on my BBBlue. Everything works and I can fly. Flying >>> is of no concern right now. I was wondering something. >>> >>> ... >>> >>> Does the SiP need to become so hot? I was thinking that it must be the RX >>> that I use w/ my transmitter. I power the RX by the Servo Header Pins (5v). >>> >>> ... >>> >>> I know that w/ ArduCopter, the people have figured out a nice way of >>> communicating to the BBBlue via PRU (Encoder 4) from the hardware that I >>> use. >>> >>> Seth >>> >>> P.S. If you are using your BBBlue for ArduCopter/ArduPilot stuff in >>> general, please do not hesitate to post here. Again, my SiP is getting to >>> hot to handle. bzzt, bzzt! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/a0e24057-d227-4531-baac-6d2b674c6e43%40googlegroups.com. -- https://beagleboard.org/about - a 501c3 non-profit educating around open hardware computing -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2BT6QPnL7%3Dbmm3CbJ89O0SiHD8FaQTscwbZDY%3DotgYeNndXpqg%40mail.gmail.com.