Additionally, it appears there's a bb-bbai-firmware package that I've successfully enabled the wlan interface with but no bluetooth yet. Even though the package claims to support bluetooth.
$ dpkg -s bb-bbai-firmware Package: bb-bbai-firmware Status: install ok installed Priority: extra Section: misc Installed-Size: 993 Maintainer: Robert Nelson <robertcnel...@gmail.com> Architecture: all Version: 1.20190803.2-0rcnee0~buster+20190803 Pre-Depends: firmware-brcm80211, bb-wl18xx-firmware Description: beagleboard.org bbai firmware bbai bluetooth firmware $ dpkg -L bb-bbai-firmware /. /lib /lib/firmware /lib/firmware/brcm /lib/firmware/brcm/brcmfmac43455-sdio.beagleboard.org,am5729-beagleboneai.txt /lib/firmware/brcm/brcmfmac43455-sdio.clm_blob /lib/firmware/brcm/brcmfmac43455-sdio_am5729-beagleboneai.bin /lib/firmware/brcm/fw_bcm43455c0_ag.bin /lib/systemd /lib/systemd/system /lib/systemd/system/bb-bbai-tether.service /usr /usr/bin /usr/bin/bb-bbai-tether /usr/share /usr/share/doc /usr/share/doc/bb-bbai-firmware /usr/share/doc/bb-bbai-firmware/changelog.Debian.gz $ dmesg | grep brcm [ 8.464243] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006 [ 8.651023] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 $ ip link show dev wlan0 5: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 80:91:33:4a:43:6d brd ff:ff:ff:ff:ff:ff $ hcitool dev Devices: On Monday, January 6, 2020 at 11:21:40 AM UTC-5, Bryan Schneiders wrote: > > I haven't yet accessed the Wifi or Bluetooth capabilities on the board but > am currently investigating the same. > > The scripts distributed with the debian images are built for the WiLink > 1835 module found in the BeagleBone Black Wireless board ( > http://www.ti.com/product/WL1835MOD). See the bb-wl18xx-firmware package > and associated files. > > The BBAI board uses an AzureWave AW-CM256SM module instead. > > https://github.com/beagleboard/beaglebone-ai/wiki/System-Reference-Manual#69-wireless-communication-80211-ac--bluetooth-azurewave-aw-cm256sm > > The AzureWave site doesn't mention this particular module and has no > software support information. A leaked copy of their product documentation > has hardware details: > > https://storage.googleapis.com/wzukusers/user-26561200/documents/5b7d0fe3c3f29Ct6k0QI/AW-CM256SM_DS_Rev%2015_CYW.pdf > > The AW documentation says this module is based on the CYW43455 chipset. > There may be helpful resources here: > https://community.cypress.com/community/linux > > > On Monday, November 18, 2019 at 9:23:55 AM UTC-5, seth...@gmail.com wrote: >> >> I just got a new AI board and wanted to play around with the bluetooth, >> but when I launch bluetoothctl, the list command says no controllers found. >> >> Is there any information out there on setting up bluetooth on this board? >> I have google'd everything I could think of with no avail. I have run >> systemctl status bluetooth and there are no issues, am I missing something? >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4a882759-d8e7-4f94-b3b3-8485ff9c5710%40googlegroups.com.