[image: SetDown.PNG] On Sunday, March 29, 2020 at 2:19:48 PM UTC-5, Mala Dies wrote: > > Hello, > > I have a RelayCape from GHI and the bbb.io peoples. I think my issue is > my issue and I need assistance w/ it. > > So... > > I connect my 12v LED to the Cape like this: > > > - COMMON (COM) to 12v battery (positive) > - NORMALLY OPEN (NO) or NORMALLY CLOSED (NC) to the LED negative lead > - Then...I put an additional wire to the negative lead on the LED to > the 12v battery (negative)/GND > > So, here lies the issue. > > I have tried w/ COM being my positive wire and negative wire but not at > the same time or simultaneously. > > ... > > [image: SetDown.PNG] > > That is a small fritzing photo to give some insight. > > Seth > > P.S. Now, the Cape works w/ the source. I can turn it on and off, w/ a > timer, w/ source. Some nodejs and bonesrcript does the trick. >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/836110cc-48ca-4d18-a681-827540265ac3%40googlegroups.com.