Just noticed your first post, Battery + positive to relay common. relay NC to LED Anode + *positive*. LED K cathode - *negative* to battery - negative.
On Sunday, 29 March 2020 20:19:48 UTC+1, Mala Dies wrote: > > Hello, > > I have a RelayCape from GHI and the bbb.io peoples. I think my issue is > my issue and I need assistance w/ it. > > So... > > I connect my 12v LED to the Cape like this: > > > - COMMON (COM) to 12v battery (positive) > - NORMALLY OPEN (NO) or NORMALLY CLOSED (NC) to the LED negative lead > - Then...I put an additional wire to the negative lead on the LED to > the 12v battery (negative)/GND > > So, here lies the issue. > > I have tried w/ COM being my positive wire and negative wire but not at > the same time or simultaneously. > > ... > > [image: SetDown.PNG] > > That is a small fritzing photo to give some insight. > > Seth > > P.S. Now, the Cape works w/ the source. I can turn it on and off, w/ a > timer, w/ source. Some nodejs and bonesrcript does the trick. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5660a439-4ed3-4338-9480-c23e5480c559%40googlegroups.com.