This is how I did it using a microSD card: https://groups.google.com/forum/m/#!category-topic/beagleboard/b21LZKh8z2w
John Allwine Principal Software Engineer https://www.pocketnc.com > On May 6, 2020, at 7:23 AM, zdenko.ba...@gmail.com wrote: > > > Hi Ahmed, > > I write a bit later but it can help someone else. > > If you have a backup of uEnv.txt - so than it is quick and simple. > > First copy file content to RAM memory: > ext4load mmc 1 0x80000000 /boot/uEnv.txt_bck > > Write content of file to new file: > ext4write mmc 1 0x80000000 /boot/uEnv.txt 2042 0 > > mmc 1 - it is my rootfs partition. Use the command mmc list to see the > partition. > > >> On Wednesday, September 14, 2016 at 3:02:59 AM UTC+2, Yahya ahmed wrote: >> Hi all, >> >> I made some changes on the uEnv.txt file from my computer , then I rebooted >> my beaglebone. >> Now it starts the u-boot and writes "starting kernel" and it just hangs. >> My system(ubuntu) can't see the beaglebone anymore when I connect it using >> USB, so I can't re-edit my uEnv.txt >> >> So, is there anyway I can undo my edits on uEnv.txt ?? Can I do it from the >> U-Boot interface ? >> >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/ce8683ff-d37a-4b71-b422-6c57e7fe57eb%40googlegroups.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/A6A875A7-63B6-459D-B0BF-8C4E597D5095%40pocketnc.com.