Hi, I use custom hat board with my old BBB on P9 headers. I would like use the same hat board with my new BBGW. However i see in the dmesg pins conflict: [ 2.131373] pinctrl-single 44e10800.pinmux: pin PIN109 already requested by 44e10800.pinmux; cannot claim for ocp:P9_41_pinmux [ 2.714948] pinctrl-single 44e10800.pinmux: pin PIN86 already requested by ocp:P9_18_pinmux; cannot claim for 4802a000.i2c [ 63.810571] pinctrl-single 44e10800.pinmux: pin PIN106 already requested by ocp:P9_91_pinmux; cannot claim for 48038000.mcasp [ 67.662623] pinctrl-single 44e10800.pinmux: pin PIN18 already requested by ocp:P9_14_pinmux; cannot claim for sound
It seems like BBB and BBGW pinout is not compatible. I suspect that maybe two Grove connectors (I2C and UART) occupy the old pins? If so how could I switch off these Grove connectors so BBGW pinout would be the same as BBB? Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/393a004a-55c9-4ac3-8ddc-a4c6b440fef1o%40googlegroups.com.
