I'm trying to use btrfs as the rootfs, but it doesn't seem to work. I created two different eMMC flasher images, one that used the --rootfs btrfs arguments and one that didn't. The one that defaults to ext4 booted up and flashed the eMMC no problem. The btrfs one errors on boot with this:
mmc0 is current device Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 8192 7364608 34e7716f-01 83 Boot Scanning mmc device 0 Checking for: /uEnv.txt ... ** Unrecognized filesystem type ** Checking for: /boot/uEnv.txt ... ** Unrecognized filesystem type ** ** Invalid partition 2 ** ** Invalid partition 3 ** ** Invalid partition 4 ** ** Invalid partition 5 ** ** Invalid partition 6 ** ** Invalid partition 7 ** switch to partitions #0, OK mmc1(part 0) is current device After that it booted using the eMMC rather than the microSD card. Any ideas? On Mon, Sep 21, 2020 at 1:56 PM Robert Nelson <robertcnel...@gmail.com> wrote: > On Mon, Sep 21, 2020 at 2:50 PM John Allwine <j...@pocketnc.com> wrote: > > > > Do I run this on a Beaglebone itself, or should it be done on something > beefier? Maybe a docker container on my mac? Or would I need an ARM device? > > An x15, or something similar.. Or any Debian based os, it'll use qemu on > x86.. > > Regards, > > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYh%2BFaaNWbDBfYft1bLVfRZ6%3DjqK87rLa%3D4qW-5eWc30xw%40mail.gmail.com > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAPEK9qYWDn%2BZgeDYkAuif6Ty%3DcsbiC8TVfcn%3DSi9DPk_HWJHAQ%40mail.gmail.com.
