On Wed, Nov 4, 2020 at 7:38 PM <mgw2...@gmail.com> wrote: > > > The USB port on the Beaglebone black Rev C board is taking minutes to finally > respond after boot. > > I have an application for an instrument that autostarts in LXDE. When the > application starts, it's > supposed to go out the USB port and communicate with the instrument system > board. > > This all worked fine in Debian 7 Wheezy. The same setup in Debian 10 is > having the USB response > problem. > > I've tried several BBB and all have reacted the same way. Normal operation > with Debian 7 and > no USB response for several minutes in Debian 10. > > The mouse connected to the USB port has it's red LED come on...so it's > getting power, but > the mouse just doesn't respond ( or a keyboard, touchscreen, etc ) for a long > time. > > The debug port shows no problems on boot.
Yeah this is an issue, i haven't found a good fix for it yet. It takes a really long time for mouse movements to first happen in xorg.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYi7vSkuPGnx%2BRNc0cCCos-1nLLGU58oR%3DsdrAAoGUQ3FQ%40mail.gmail.com.