Have you set up the USB Network connection from a PC to the BBBW? You can see what Mark Yoder did in his exercises for a couple of options: https://elinux.org/EBC_Exercise_08_Installing_Development_Tools_4.4
Cheers, Jon Cheers, Jon On Wed, Nov 11, 2020 at 6:51 AM Riley Porter <rileypor...@gmail.com> wrote: > I have compiled Roberts kernel (https://github.com/RobertCNelson/bb-kernel) > and now trying to figure out how to install the new kernel and the dtb file > in order to test it. I know most tutorials say to use tftp and ethernet > however the black does not have ethernet. > > What is the preferred method of doing this? > > I have a UART connection, however if think to do this I would have to > compile the SPL too? Which means I would have to compile uboot, transfer > the SPL, then execute uboot from memory, then transfer the uimage and dtb > then boot? > > I have not tried this, thinking that there might be an easier way to do > this? > > Thanks! > > Riley > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CABc8zjQ1HnQ8JUFen2p4S7aEGU8uqvLRaZGmLPuK6NLSvGWtgw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CABc8zjQ1HnQ8JUFen2p4S7aEGU8uqvLRaZGmLPuK6NLSvGWtgw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkocXWgBDJWA7En_03%2B3qHw%2BU485ftQ6S_HaNYx1FYhwag%40mail.gmail.com.