Your running EVM code on a BBB it's slightly different hardware this subject came up before and was discussed in e2e forum I think the TI app engineer said it's possible but required some template changes he also said jtag was default Anytime you start changing the default as in ignoring suggested hardware and taking short cuts like not buying a jtag and your a beginner you end up flopping around I have an EVM and jtag it worked great. Your also asking in a group that's pro open source everything. In this case I agree try a simple example and read the source code so you know what's it's doing. I foresee much frustration and reading in your future but I guess if you don't have the $$$ to buy the suggested setup clearly documented ask whoever gave you this college task to buy it unless you like pain it's apparent you didn't read the many documents which can be intimidating to a Newb. I'd spend some time loo,ing in the e2e forum on this subject
Sent from Yahoo Mail on Android On Sat, Jan 16, 2021 at 8:39 PM, Karthik Eswar<keswa...@gmail.com> wrote: I used the images that were present in the sdk rtos installed directory by default On Sun, 17 Jan, 2021, 4:09 am Graham Stott, <gbcsto...@comcast.net> wrote: So It looks like the I2C test that you are running has an issue. Can you try something simple. For example, the hello world test. And no you do not need a JTAG to debug. You should be able to use printf. Graham From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Karthik Eswar Sent: Friday, January 15, 2021 10:02 PM To: BeagleBoard <beagleboard@googlegroups.com> Subject: [beagleboard] Booting Beaglebone Black with SDK RTOS I tried booting Beaglebone Black with pre-built sdcard.img provided in the path C:\ti\processor_sdk_rtos_am335x_6_03_00_106\prebuilt-sdcards\evmAM335x\sd_card_img. I connected the board using USB-TTL to view the booting procedure, but it shows: StarterWare Boot Loader BOARDInit status [0x0] SoC : [AM335X] Core : [A8] Board Detected : [BEAGLEBONEBLACK] Base Board Revision : [UNKNOWN] Daughter Card Revision: [UNKNOWN] Copying application image from MMC/SD card to RAM Jumping to StarterWare Application... I2C Test: 400Kbps: Data Mismatch I2C Test: 100Kbps: Data Mismatch Some tests have failed. Kindly help me with this -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4bf271c3-7de7-46f7-9959-48078009e2ean%40googlegroups.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/001801d6ec58%24706961c0%24513c2540%24%40comcast.net. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABwUBJhMpB3R1sR07bSgPuzH261d%2BN1718-6aX56ZVq%3D5jYDgQ%40mail.gmail.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1685358134.1635439.1610855216527%40mail.yahoo.com.
