On Mon, 25 Jan 2021 10:42:50 -0500, in gmane.comp.hardware.beagleboard.user
Steve Lentz <stlentz-re5jqeeqqe8avxtiumw...@public.gmane.org> wrote:
>Here is the diagram for my i2c device. This shows where the pull-up resistors
>are added. You will need something similar.
>
>But first check the documentation for the thermo-click to see if it already
>has pull-up resistors. It may have 2K, 5K, 10K already. Don’t allow the
>parallel resistance to go below 500 ohms.
>
If I interpret the confusing schematic from
https://www.mikroe.com/thermo-9-click there appear to already be a pair of
4.7k pull-ups on the board.
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/e70u0g58r86qs7ct4roe7b5fjpgk6pit1f%404ax.com.
