Try the instructions from this link. It works for me: https://www.digikey.com/en/maker/blogs/how-to-connect-a-beaglebone-black-to-the-internet-using-usb
Cheers, Jon On Tue, Feb 2, 2021 at 11:41 AM Eli <crimea75...@gmail.com> wrote: > Hello > > I am an absolute beginner with the BeagleBone Black and Linux, the > learning is not easy ... > I can boot my BBB from the SD Card and then get access the board from the > browser. > http://192.168.7.2/ > > The BBB is connected to my laptop through USB and I also tried to connect > through the Ethernet cable, while USB is used as Power Supply. > > There I see the message that I "need to upgrade my SW". However I have > been fighting a few days and so far I have failed. I am trying to get the > update by performing git pull, but that what I see: > > fatal: unable to access 'https://github.com/RobertCNelson/boot-scripts/': > Could not resolve host: github.com > > I removed Antivirus and tried to disable Windows firewalls - still can't. > I did that because I believe the problem is in some TCP IP Network > configuration on my laptop. > > I tried to follow these instructions: > http://derekmolloy.ie/set-ip-address-to-be-static-on-the-beaglebone-black/ > > I am facing the same result. Derek in the article above writes: > "The BBB then has a static IP address after reboot. The same procedure > applies to other adapter entries, such as the wlan0 wireless Ethernet > adapter. Do not pick an address that is within the DHCP pool or assigned to > another device, or it will result in IP conflicts on the network." Actually > did not apply the required procedure on my laptop, because I actually > didn't understand the instruction. > > Do you have any idea that can help me to troubleshoot and resolve the > problem? Thank you in advance for any help ! > > Eli > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/e086baee-84fd-4810-b97f-1ae55ceeb49fn%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/e086baee-84fd-4810-b97f-1ae55ceeb49fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkoxmn2fE%2BTGeRu23VAJ%2BNhPw8De-OJogvOD%3DONruufegg%40mail.gmail.com.
