Hello, Sorry for all the posts here: https://pastebin.com/ixBWnduD is something to look through now.
I have listed SPIDEV 2.0. Enjoy! Now, we need to find out how to type up a portion of .dts formatted text into a .dts file w/ the correct syntax for the AI. Seth P.S. I am sure someone already knows how to do this but learning is half the battle! Answer at will! On Tuesday, March 16, 2021 at 3:08:44 AM UTC-5 anandp...@gmail.com wrote: > I already tried with both spidev0 and spidev1. No luck. > > On Tue, 16 Mar 2021, 04:39 set_, <fun...@gmail.com> wrote: > >> Hello, >> >> Use SPIDEV0 and not SPIDEV1. I think this may get you closer to running >> the test. >> >> Seth >> On Thursday, March 11, 2021 at 11:45:50 AM UTC-6 anandp...@gmail.com >> wrote: >> >>> An additional information: >>> I can see the spi interfaces in the /dev/ folder. >>> >>> On Thursday, March 11, 2021 at 6:44:38 PM UTC+1 anandp...@gmail.com >>> wrote: >>> >>>> Hi Everyone, >>>> >>>> I am trying to enable the spi interface on beaglebone AI. >>>> I used the roboticscape device tree structure from the link below: >>>> >>>> https://github.com/beagleboard/BeagleBoard-DeviceTrees >>>> The show-pins command shows that spi interface is up. However, when I >>>> run the spidev_test, I receive a stream of 0's instead of actual data. >>>> >>>> I bridged the pins p9.29 and P9.30 before running the test. >>>> Can anyone provide some solution to fix this issue? >>>> >>>> Thanks >>>> Anand >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/e071b9f6-be3a-44c7-9fed-b0d82d8a76f4n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/e071b9f6-be3a-44c7-9fed-b0d82d8a76f4n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/120b73c8-20ce-4a4d-8449-de7a549585b2n%40googlegroups.com.