On Fri, May 28, 2021 at 2:45 PM Robert Nelson <robertcnel...@gmail.com> wrote: > > On Fri, May 28, 2021 at 2:41 PM Mark Lazarewicz <lazar...@yahoo.com> wrote: > > > > Thanks!! > > > > Think of it as I'm validating the instructions I think having these is > > something good. Unfortunately my VM blew up just now. > > > > I KNOW your adamant about not supporting VM. > > > > So I'll build a dedicated Debian 8 dev box. > > > > Any hints tips lessons learned what you use be appreciated. > > > > Have a great long weekend. > > VM's usually fail when using 'dd'.. so MLO/u-boot.img is usually the > failure point..
I think mainline might work: debian@beaglebone:~$ uname -r 5.13.0-rc3-bone2.2 debian@beaglebone:~$ dmesg | grep pru [ 2.044506] remoteproc remoteproc1: 4a334000.pru is available [ 2.045701] remoteproc remoteproc2: 4a338000.pru is available debian@beaglebone:~$ ls /dev/remoteproc/pruss-core* /dev/remoteproc/pruss-core0: coredump device firmware name power recovery state subsystem uevent /dev/remoteproc/pruss-core1: coredump device firmware name power recovery state subsystem uevent @Mark Yoder can you test? ;) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjjHPf9zqKcLYO7_dr4NvaenAnqwyrWaYv8HQwBFWceZw%40mail.gmail.com.
