Hi,
Perldoc for $| is as below: 1. If set to nonzero, forces a flush right away and after every write or print on the currently selected output channel. Default is 0 (regardless of whether the channel is really buffered by the system or not; $| tells you only whether you've asked Perl explicitly to flush after each write). 2. STDOUT will typically be line buffered if output is to the terminal and block buffered otherwise. Setting this variable is useful primarily when you are outputting to a pipe or socket, such as when you are running a Perl program under rsh and want to see the output as it's happening. Kindly explain the above two lines in simple language. What effect does buffering have? What happens when a flush is forced? It would be great if some of you write a simple code which has two different outputs for $| = 0 & $| = 1 to demonstrate the difference. Thanks & Regards, Sanket Vaidya _____________________________________________________________________ This e-mail message may contain proprietary, confidential or legally privileged information for the sole use of the person or entity to whom this message was originally addressed. Any review, e-transmission dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this e-mail in error kindly delete this e-mail from your records. If it appears that this mail has been forwarded to you without proper authority, please notify us immediately at netad...@patni.com and delete this mail. _____________________________________________________________________
