On Sun, 2008-07-20 at 21:20 -0400, Joe Landman wrote:
> Greg Lindahl wrote:
> That said, we like IPMI in general, and even better when it works :(
> Sometimes it does go south, in a hurry (gets into a strange state). In
> which case, removing power is the only option.
Agreed. Currently my most common reason for going into the machine room
is to pull the power cable out of a node in the hope that the BMC will
reset in a sane state, which it usually does. If I had network switched
PDUs I'd never have to leave my office.
The advantage of smart PDUs is that they can switch off anything whereas
IPMI and other lights-out systems usually only exist on computers. All
things being equal I'd rather have both.
There is also a green issue here. Modern systems draw power even when
they are "off" in order to keep the BMC and network card live. Obviously
a system switched off at the PDU draws no power. Having said that I
haven't looked at how much power an unloaded smart PDU draws.
Thanks,
Huw
--
Huw Lynes | Advanced Research Computing
HEC Sysadmin | Cardiff University
| Redwood Building,
Tel: +44 (0) 29208 70626 | King Edward VII Avenue, CF10 3NB
_______________________________________________
Beowulf mailing list, [email protected]
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
