On 29 April 2013 12:52, Jörg Saßmannshausen <[email protected]> wrote: > Hi Jonathan, > > thanks for the reply. > > As I said, I have looked for a firmware upgrade here. From that side > http://www.supermicro.com/products/motherboard/xeon/c600/x9drt-hibqf.cfm > which I got from the technical support there is no upgrade available. The > version I can download here is 2.10.700 which is the one I have installed. > > Just to complicate things, I cannot find the PSID SM_2181000001000 on the > link > you gave me. Unfortunately, the other information on that and similar sides > are confusing as well as I would not know which exact card I got here. > > I am actually using the Mellanox mlxburn program here as I am unable to get > the information I want with the OFED mstflint. > > Any ideas? > > By the way, do you have a card or is it mounted on the motherboard?
I have the same supermicro system as you. I was supplied by my vendor with the file: X9DRT-HIBQF-2.11.0500_revised.bin which I could burn to the card with the RHEL supplied mstflint utility (from the package of the same name) as follows: # mstflint -d 06:00.0 -i X9DRT-HIBQF-2.11.0500_revised.bin -allow_psid_change burn (where 06:00:00 is the PCI ID of the card). I'll send you the file offlist, but you I suggest you prod SuperMicro to make sure it's okay before you proceed with the burn. Cheers -- Jonathan Barber <[email protected]> _______________________________________________ Beowulf mailing list, [email protected] sponsored by Penguin Computing To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
