In message <[email protected]>, Jonath
an Mast writes:
>
> I can't get nslookup to correctly return the values i've specified in my
> zone files.
>
> I've ran both named-checkconf and named-checkzone on my addr and ptr files
> and they both indicate proper formatting.
>
> here is what I get when I issue "nslookup dell2"
> Server: 192.168.1.10
> Address: 192.168.1.10#53
>
> ** server can't find dell2: NXDOMAIN
>
> dell2 is specified in my aforementioned zone files.
>
> 192.168.1.10 is the nameserving host, dell2 should return 192.168.1.20
>
> here's my setup:
> BIND 9.4.2-P2
> Slackware 12.2
>
> thanks
You have a configuration error. Unless you show us your configuration
there is nothing anyone can do. Post copies of the zones *unmodified*
and /etc/resolv.conf as you are depending apon the search list there
to correctly qualify dell2.
Note named-chech{zone,conf} only determine if the zone/confuguration is
ell formated. They can't determine if is correct however.
Mark
--
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742 INTERNET: [email protected]
_______________________________________________
bind-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/bind-users
