Hi Philippe, I tried the zone xfer by hand and it was successful. Actually, all the zones are being transferred to slave successfully, the only problem is when I try to resolve the hosts from the slave DNS, I am getting SERVFAIL error.
What other things that I could check? Thanks and Best Regards, Rock ________________________________ From: "[email protected]" <[email protected]> To: [email protected]; Sent: Thu, September 9, 2010 5:06:40 PM Subject: RE: Slave DNS zone problem Hi just a small check : try connectivity and zone xfer by hand, just to see if an ACL in not blocking it : on the slave : dig @master.com zone.com axfr Philippe From:[email protected] [mailto:[email protected]] On Behalf Of Rock July Sent: Thursday, September 09, 2010 10:43 To: [email protected] Subject: Slave DNS zone problem Hi All, I have a problem with one of my DNS. This DNS is configured as slave and have two masters (hosting different domains). Recently, I changed the IP of one of the master DNS then all domains under that master DNS cannot be resolved on the slave DNS although the zone files keeps on updating. For other slave DNS, still works fine. Also, I just noticed that all new domains created on the two master DNS cannot be resolved in the slave DNS but the zone file is updated. I am getting SERVFAIL error. I also tried named-checkconf and named-checkzone but no error found. What are the others things/parameters taht I should check? Thanks and Regards, Rock
_______________________________________________ bind-users mailing list [email protected] https://lists.isc.org/mailman/listinfo/bind-users
