On Thu, Jun 05, 2014 at 05:21:47PM +0200, Reindl Harald wrote: > what the hell invents "$TTL 0 ; 0 seconds" lines before > each CNAME block while on the master there is exactly > one TTL line with 86400 on top of the file?
The way named writes a zone file is not the way I would do it. Records are strictly in alphabetic order, and $TTL blocks are made around all RRSETs where TTL varies. The zone FILE is not your problem. I don't know exactly what the problem might be. It seems that something is intercepting and filtering the zone transfers? You could try transfers manually from the slave: dig [key auth if required] rhsoft.net. axfr @91.118.73.16 Does that show any zero TTLs? If so I suggest you place a couple of sniffers at strategic spots, one leaving the master, another entering the slave, and force a zone transfer. -- http://rob0.nodns4.us/ Offlist GMX mail is seen only if "/dev/rob0" is in the Subject: _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users