Hi Mike,
In production since July 2013 without complaints and believe it has
helped here.
rate-limit { responses-per-second 10; window 5; };
best!
jim
On 5/26/2015 5:00 PM, Mike Hoskins (michoski) wrote:
Hi folks,
I've read about RRL with interest since its inception, but just now
getting around to rolling it out. That is partially because we run a very
small authoritative infrastructure serving mostly as Akamai EDNS origins.
However, since it is exposed externally, used by a few tenants and RRL has
been running in the wild for awhile now...we decided to finally hop on the
bandwagon as part of our latest round of DNS infrastructure upgrades.
We are experimenting in log-only mode, and wanted to get feedback on
settings which work well for others in production. So far we have the
following which appears to work well (not limiting typical clients during
normal operation):
rate-limit {
log-only yes;
ipv4-prefix-length 32;
window 10;
responses-per-second 20;
nxdomains-per-second 10;
exempt-clients {
[...]
};
};
However, as we've mostly just been turning knobs in an attempt to minimize
log entries... insight from operators is appreciated.
Thanks!
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
