On 11/11/2015 02:55 AM, Julie Xu wrote:
After I read some bind information, it looks like most configure example is
use dhcp/ddns together.
DHCP and Dynamic DNS are quite often used together, but it is not a
requirement.
You can easily have Dynamic DNS enabled on a (sub)domain (zone) that has
statically configured clients in it. The zone file won't get many
(any?) updates.
I have a number of zones with statically configured clients using DDNS
so that BIND will mange the DNSSEC for me.
With DDNS enabled, you can use the nsupdate command to add / change /
remove records from the zone.
Please advice, if I can make a subdomain and make this subnet will contact the
dns server to get a dns name dynamicly. I would like it:
- every machine in this subnet will get a dns name automatically
Statically configured machines won't reach out to the DNS server to get
their configuration. That's where the "static configuration" comes into
play.
- the dns name is same as the host name
The hosts set their own name, and optionally give DDNS updates.
- the dns name will automatically be removed after the ip offline or
the hostname changed.
That's going to be difficult. There's no good way for a DNS server to
know when a host is offline.
Some DHCP servers will approximate this behavior by watching for a DHCP
release message and / or periodically pinging IPs that have been leased
to see if the client is still on line. Further, some DHCP servers will
reap DNS records for clients that are offline.
If these action can be achive, please advice how can I configure it?
DDNS for a static subnet is simple, just follow any DDNS tutorial, minus
the DHCP part.
Any comments will be appreciated
Good luck.
--
Grant. . . .
unix || die
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
bind-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/bind-users
