On 05.05.18 09:52, Blason R wrote:
OK So wondering if I have master in cloud wanted to know which port should
I open for slave which is behind corporate firewall and if I set as below
then my slaves will start listening on port 2034? I am bit confused on
port
numbers for NOTIFY messages and NOTIFY-UPDATED [i.e. AXFR/IXFR]
On Sat, May 5, 2018 at 10:34 PM, Matus UHLAR - fantomas <uh...@fantomas.sk>
wrote:
source port: random.
destination port: 53 (standard DNS port).
you don't need to enable different ports unless you can't do stateful
firewall
On 05.05.18 22:53, Blason R wrote:
Absolutely that is TCP/53 required for Zone Xfer right?
not only xfer. both TCP and UDP are required for working DNS.
--
Matus UHLAR - fantomas, uh...@fantomas.sk ; http://www.fantomas.sk/
Warning: I wish NOT to receive e-mail advertising to this address.
Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu.
Remember half the people you know are below average.
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
