On 17.11.20 05:41, Boylan, Ross wrote:
One other detail may be important: I just added a bridge interface and virtual machines. I presume the VPN tunnel was using the hardware interface (enp5s0) before, and is using the bridge (br0) now. OpenConnect creates the tunnel (tun0); both the name and inspection of the code indicate the tunnel is based on the TUN interface, at the IP layer, instead of the TAP interface, at the MAC layer. If some of the communication is not using IP then I presume it could be disappearing at the bridge.
I guess that your VPN uses the IP that topologically closest to the other side of VPN tunnel. Usually it's the IP with the default route set. you can often override it in the VPN configuration. Note this is not bind issue. -- Matus UHLAR - fantomas, uh...@fantomas.sk ; http://www.fantomas.sk/ Warning: I wish NOT to receive e-mail advertising to this address. Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. Eagles may soar, but weasels don't get sucked into jet engines. _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list ISC funds the development of this software with paid support subscriptions. Contact us at https://www.isc.org/contact/ for more information. bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
