Hello! Of course this is only a workaround
But..... I use this command with Cisco 7200 12.2(28)SB5 software, which is older than 12.3(21) Another temporaly solution is to disable lls globally . router ospf 1 router-id 10.0.0.2 no capability lls 2010/3/19 Vitaliy Kolodinsky <kolodin...@telecom.by>: > Dear, Csaba Szép. > > Вы писали 19 марта 2010 г., 19:11:51: > >> In my opinion, this is the same issue that i reported at 2009.10.05 in >> this list. > >> Then i disabled LLS in the cisco side, and after everything works well. > > >> ip ospf lls disable > > Using the ip ospf lls disable probably quite a good temporary solution, but > the old IOS, this command is not > > bras7 (config-subif) # ip ospf lls disa > ^ > % Invalid input detected at '^' marker. > > bras7 (config-subif) # do sh ver > Cisco Internetwork Operating System Software > IOS (tm) 7200 Software (C7200-JS-M), Version 12.3 (21), RELEASE SOFTWARE (fc2) > Technical Support: http://www.cisco.com/techsupport > > > With pleasure I will see a patch from the author > and with no less pleasure test the patch work. > > -- > > Best regards, > Vitaliy > Kolodinsky > BYVK-RIPE > ISP Atlant Telecom > kolodin...@telecom.by > >