Hello, > Yes... It is more adequate solution, but... in quagga it works without > need to change anything in openvz or quagga code. I will try to patch > sysdep/linux/netlink/netlink.c, as You wrote earlier. I write about > the result.
And it works ! :), after rebuild the bird with commented out lines from file above (more info: [1]) I can see the openvz routes in bird's routing table and on others ospf routers: 0.0.0.0/0 via X.Y.11.1 on eth0 [kernel1 12:32] * (10) 10.1.1.0/24 dev eth1 [MyOSPF 12:32] * I (150/10) [X.Y.11.3] 192.168.1.140/32 dev venet0 [kernel1 12:32] * (10) X.Y.10.65/32 dev venet0 [kernel1 12:32] * (10) X.Y.11.0/29 dev eth0 [MyOSPF 12:32] * I (150/10) [X.Y.11.3] X.Y.10.64/32 dev venet0 [kernel1 12:32] * (10) X.Y.10.61/32 dev venet0 [kernel1 12:32] * (10) X.Y.10.60/32 dev venet0 [kernel1 12:32] * (10) 192.168.1.51/32 dev venet0 [kernel1 12:32] * (10) Is there any other solution to this, rather then patching source ? [1] http://www.mail-archive.com/bird-users@atrey.karlin.mff.cuni.cz/msg01039.html -- Pozdrawiam, Łukasz Chrustek