Hi all, I've upgraded up and down to see when the issue was introduced: between 1.4.0 and 1.4.1.
Ondrej, Martin, how can I help debug this? Would you like access to the machines? Kind regards, Job On Mon, Jun 23, 2014 at 04:02:25PM +0000, Job Snijders wrote: > Hi all, > > I just upgraded from 1.4.0 to 1.4.3 (compiled from -current ports) on OpenBSD > 5.5, now OSPFv3 adjecencies don't establish any longer, they remain stuck in > exstart. I saw a thread a while ago about IPv6 issues on FreeBSD with 1.4.1, > maybe this is related but the bug fix does not work on OpenBSD? > > syslog is filled with these messages: > > Jun 23 15:34:14 dcg-1 bird6: ospf1: Socket error on bnx0: Invalid argument > Jun 23 15:34:24 dcg-1 last message repeated 6 times > Jun 23 15:34:24 dcg-1 bird6: ospf1: Socket error on bnx2: Invalid argument > Jun 23 15:34:24 dcg-1 bird6: ospf1: Socket error on bnx0: Invalid argument > Jun 23 15:34:28 dcg-1 last message repeated 3 times > > this is my config: > > [root@dcg-1 ~]# cat /etc/bird6.conf > log syslog all; > router id 94.142.247.1; > protocol kernel { > scan time 20; > export all; > } > protocol device { > scan time 2; > } > protocol direct { > interface "lo1"; > interface "bnx0"; > interface "bnx2"; > } > protocol static { > route 2a02:898::/32 blackhole; > } > filter only_loopbacks { > if net ~ [ 2a02:898:0:300:0:0:0:0/64{128,128} ] then accept; > reject; > } > protocol ospf ospf1 { > tick 2; > rfc1583compat yes; > import filter only_loopbacks; > export filter only_loopbacks; > area 0.0.0.0 { > interface "bnx0", "bnx2" { > hello 10; retransmit 2; wait 10; dead 40; > type pointopoint; > }; > > }; > } > > [root@dcg-1 ~]# birdc6 show ospf nei > BIRD 1.4.3 ready. > ospf1: > Router ID Pri State DTime Interface Router IP > 195.85.225.5 128 exstart/ptp 00:34 bnx0 > fe80::21f:12ff:fe1c:3482 > > Kind regards, > > Job