Hello,
I am trying to configure BFD protocol. If configure 2 instances with below, it
doesn't work. So I have to configure one instance, and put all the neighbors
list to it.
Is it possible to configure separate instance ?
The below doesn't work
protocol bfd Test1 {
interface "eth2" {
min rx interval 1000000 us;
min tx interval 1000000 us;
idle tx interval 3000000 us;
multiplier 3;
};
neighbor X1.Y1.Z1.A1 local X1.Y1.Z1.B1;
}
protocol bfd Test2 {
interface "eth0" {
min rx interval 1000000 us;
min tx interval 1000000 us;
idle tx interval 3000000 us;
multiplier 3;
};
neighbor X2.Y2.Z2.A2 local X2.Y2.Z2.B2;
}
Below it is working,
protocol bfd Test {
interface "eth*" {
min rx interval 1000000 us;
min tx interval 1000000 us;
idle tx interval 3000000 us;
multiplier 3;
};
neighbor X1.Y1.Z1.A1 local X1.Y1.Z1.B1;
neighbor X2.Y2.Z2.A2 local X2.Y2.Z2.B2;
}
With best regards,
Chris
Thales is in the process of carving out its Transportation activity (GTS) from
other Thales' activities. In order to prepare this internal restructuring, a
new e-mail address has been adopted and your GTS contacts now use
urbanandmainlines.com. Please note that their Thales e-mail address remains
also valid.
