Hi Mempoololic Anonymous fellow,
> 2. Staggered broadcast of replacement transactions: within some time
> interval, maybe accept multiple replacements for the same prevout, but
only
> relay the original transaction.
If the goal of replacement staggering is to save on bandwidth, I'm not sure
it's going to be effective if you consider replacement done from a
shared-utxo. E.g, Alice broadcasts a package to confirm her commitment,
relay is staggered until T. At the same time, Bob broadcasts a package to
confirm his version of the commitment at a slightly better feerate, relay
is staggered until T.
At T, package A gradually floods from Alice's peers and package B does the
same from Bob's peers. When there is an intersection. B overrides A and
starts to replace package A in the network mempools nearest to Alice. I
think those peers won't have bandwidth saving from adopting a replacement
staggering strategy.
Or maybe that's something completely different if you have in mind ? I
think it's worth more staggering detail to guess if it's robust against all
the replacement propagations patterns.
Though if we aim to save on replacement bandwidth I wonder if a "diff-only"
strategy, assuming some new p2p mechanism, would be more interesting (as
discussed in the recent "Thoughts on fee bumping thread").
> A lingering concern that I have about this idea is it would then be
> possible to impact the propagation of another person’s transaction, i.e.,
> an attacker can censor somebody’s transaction from ever being announced by
> a node if they send enough transactions to fill up the rate limit.
> Obviously this would be expensive since they're spending a lot on fees,
but
> I imagine it could be profitable in some situations to spend a few
thousand
> dollars to prevent anyone from hearing about a transaction for a few
hours.
> This might be a non-issue in practice if the rate limit is generous and
> traffic isn’t horrendous, but is this a problem?
I think I share the concern too about an attacker exhausting a node
transaction relay ressources to prevent another person's transaction to
propagate, especially if the transaction targeted is a L2's time-sensitive
one. In that latter context, an attacker would aim to delay the relay of a
time-sensitive transaction (e.g a HTLC-success) to the miners, until the
timelock expires. The malicious delay period should swallow the go-to-chain
HTLC deadline ("the deadline for received HTLCs this node fulfilled" in
bolt 2 parlance), in that current example 18 blocks.
Let's say we allocate 10 MB of bandwidth per-block period. Once the 10 MB
are exhausted, there is no more bandwidth allocated until the next block is
issued. If the top mempool feerate is 1 sat/vb, such naive design would
allow an attacker to buy all the p2p network bandwidth period for 0.1 BTC.
If an attacker aims to jam a HTLC transaction for the 18 blocks period, the
cost is of 1,8 BTC. If the attacker is a LN counterparty to a HTLC worth
more than 1.8 BTC, the attack sounds economically profitable.
Worst, the p2p network bandwidth is a public resource while a HTLC is a
private, off-chain contract. An attacker could be counterparty to many
HTLCs, where each HTLC individual value is far inferior to the global p2p
bandwidth cost but the sum, only known to the attacker, is superior to.
Therefore, it sounds to me that p2p network bandwidth might be attractive
if the stealing are batched.
Is the attacker scenario described credible ? Are the numbers sketched out
realistic ?
If yes, I think one design insight for eventual transaction relay rate
limiting would be to make them "dynamic", and not naively fixed for a
period. By making them dynamic, an attacker would have to compete with the
effective feerate proposed by the victim transaction. E.g, if the
HTLC-success feerate is of 10 sat/vb, an attacker would have to propose a
stream of malicious transaction of more than 10 sat/vb during the whole
HTLC deadline period for the transaction-relay jamming to be effective.
Further, the attack might be invisible from the victim standpoint, the
malicious flow of feerate competitive transactions can be hard to
dissociate from an honest one. Thus, you can expect the
HTLC transaction issuer to only slowly increase the feerate at each block,
and those moves to be anticipated by the attacker. Even if the transaction
issuer adopts a scorched-earth approach for the latest blocks of the
deadline, the absolute value of the HTLC burnt in fees might still be less
than the transaction relay bandwidth exhaustion paid by the attacker
because the attack is batched by the attacker.
I'm not sure if this reasoning is correct. Though if yes, the issue sounds
really similar to "flood&loot" attack affecting LN previously researched on
[0]. What worries me more with this "exhaust&loot" is that if we introduce
bounded transaction relay rate limiting, it sounds a cheaper public
ressource to buy than the mempool..
[0] https://arxiv.org/pdf/2006.08513.pdf
Anyway, I would say it's worthy to investigate more transaction relay rate
limiting designs and especially carefully weigh the implications for L2s.
Those ones might have to adjust their fee-bumping and transaction
rebroadcast strategies in consequence.
> Suhas and Matt [proposed][0] adding a policy rule allowing users to
specify
> descendant limits on their transactions. For example, some nth bit of
> nSequence with nVersion 3 means "this transaction won't have more than X
> vbytes of descendants" where X = max(1000, vsizeof(tx)) or something. It
> solves the pinning problem with package RBF where the attacker's package
> contains a very large and high-fee descendant.
Hey, what if the pinning transaction has a parent with a junk feerate ?
Let's say you have commitment tx for a HTLC of value 500000 sats, with top
mempool feerate of 50 sat/vbyte. The commitment tx is pinned by a malicious
tx of size 1000 vbytes, matching top mempool feerate. This malicious tx has
a second unconfirmed parent (in addition to the commitment) of size
MAX_STANDARD_TX_WEIGHT offering a 1 sat/vb. I think the pinning transaction
ancestor score would be less than 2 sat/vb and thus considered irrelevant
for block template inclusion ? At the same time, as the pinning transaction
is attached with a top mempool feerate, the honest user wouldn't be able to
replace it with a better-feerate proposal ? Unless adopting a
scorched-earth approach, although economically I don't think this
fee-bumping strategy is safe in case of batch-pinning.
It might be fixable if we make one additional requirement "The child
transaction subject to the user-elected descendant limit must have only one
unconfirmed parent" (here the commitment
transaction) ? Though I'm not even sure of the robustness of this fix. The
commitment transaction itself could be used as a junk parent to downgrade
the pinning transaction ancestor score. E.g, using a revoked commitment
transaction with `max_accepted_htlcs` on both sides, pre-signed with a
feerate of 1 sat/vb. We might restrict the maximum number of pending HTLCs
network-wise to make the worst commitment transaction size reasonable,
though not sure if my LN colleagues are going to like the idea..
Is that reasoning correct and conform to our Ancestor Set Based algorithm
approach ? Maybe more details are needed.
> Also, coming back to the idea of "we can't just use {individual, ancestor}
> feerate," I'm interested in soliciting feedback on adding a “mining score”
> calculator. I've implemented one [here][2] which takes the transaction in
> question, grabs all of the connected mempool transactions (including
> siblings, coparents, etc., as they wouldn’t be in the ancestor nor
> descendant sets), and builds a “block template” using our current mining
> algorithm. The mining score of a transaction is the ancestor feerate at
> which it is included.
I don't have a strong opinion there yet, though if we make this "block
template" construction the default one, I would be really conservative to
avoid malicious child attachment on multi-party transactions downgrading
the block inclusion efficiency.
Antoine
Le mer. 9 mars 2022 à 10:37, Gloria Zhao via bitcoin-dev <
bitcoin-dev@lists.linuxfoundation.org> a écrit :
> Hi RBF friends,
>
> Posting a summary of RBF discussions at coredev (mostly on transaction
> relay rate-limiting), user-elected descendant limit as a short term
> solution to unblock package RBF, and mining score, all open for feedback:
>
> One big concept discussed was baking DoS protection into the p2p level
> rather than policy level. TLDR: The fees are not paid to the node operator,
> but to the miner. While we can use fees to reason about the cost of an
> attack, if we're ultimately interested in preventing resource exhaustion,
> maybe we want to "stop the bleeding" when it happens and bound the amount
> of resources used in general. There were two main ideas:
>
> 1. Transaction relay rate limiting (i.e. the one you proposed above or
> some variation) with a feerate-based priority queue
> 2. Staggered broadcast of replacement transactions: within some time
> interval, maybe accept multiple replacements for the same prevout, but only
> relay the original transaction.
>
> Looking to solicit feedback on these ideas and the concept in general. Is
> it a good idea (separate from RBF) to add rate-limiting in transaction
> relay? And is it the right direction to think about RBF DoS protection this
> way?
>
> A lingering concern that I have about this idea is it would then be
> possible to impact the propagation of another person’s transaction, i.e.,
> an attacker can censor somebody’s transaction from ever being announced by
> a node if they send enough transactions to fill up the rate limit.
> Obviously this would be expensive since they're spending a lot on fees, but
> I imagine it could be profitable in some situations to spend a few thousand
> dollars to prevent anyone from hearing about a transaction for a few hours.
> This might be a non-issue in practice if the rate limit is generous and
> traffic isn’t horrendous, but is this a problem?
>
> And if we don't require an increase in (i.e. addition of "new") absolute
> fees, users are essentially allowed to “recycle” fees. In the scenario
> where we prioritize relay based on feerate, users could potentially be
> placed higher in the queue, ahead of other users’ transactions, multiple
> times, without ever adding more fees to the transaction. Again, maybe this
> isn’t a huge deal in practice if we set the parameters right, but it seems…
> not great, in principle.
>
> ---------
>
> It's probably also a good idea to point out that there's been some
> discussion happening on the gist containing my original post on this thread
> (https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff).
>
> Suhas and Matt [proposed][0] adding a policy rule allowing users to
> specify descendant limits on their transactions. For example, some nth bit
> of nSequence with nVersion 3 means "this transaction won't have more than X
> vbytes of descendants" where X = max(1000, vsizeof(tx)) or something. It
> solves the pinning problem with package RBF where the attacker's package
> contains a very large and high-fee descendant.
>
> We could add this policy and deploy it with package RBF/package relay so
> that LN can use it by setting the user-elected descendant limit flag on
> commitment transactions. (Otherwise package RBF is blocked until we find a
> more comprehensive solution to the pinning attack).
>
> It's simple to [implement][1] as a mempool policy, but adds some
> complexity for wallets that use it, since it limits their use of UTXOs from
> transactions with this bit set.
>
> ---------
>
> Also, coming back to the idea of "we can't just use {individual, ancestor}
> feerate," I'm interested in soliciting feedback on adding a “mining score”
> calculator. I've implemented one [here][2] which takes the transaction in
> question, grabs all of the connected mempool transactions (including
> siblings, coparents, etc., as they wouldn’t be in the ancestor nor
> descendant sets), and builds a “block template” using our current mining
> algorithm. The mining score of a transaction is the ancestor feerate at
> which it is included.
>
> This would be helpful for something like ancestor-aware funding and
> fee-bumping in the wallet: [3], [4]. I think if we did the rate-limited
> priority queue for transaction relay, we'd want to use something like this
> as the priority value. And for RBF, we probably want to require that a
> replacement have a higher mining score than the original transactions. This
> could be computationally expensive to do all the time; it could be good to
> cache it but that could make mempool bookkeeping more complicated. Also, if
> we end up trying to switch to a candidate set-based algorithm for mining,
> we'd of course need a new calculator.
>
> [0]:
> https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff?permalink_comment_id=4058140#gistcomment-4058140
> [1]: https://github.com/glozow/bitcoin/tree/2022-02-user-desclimit
> [2] https://github.com/glozow/bitcoin/tree/2022-02-mining-score
> [3]: https://github.com/bitcoin/bitcoin/issues/9645
> [4]: https://github.com/bitcoin/bitcoin/issues/15553
>
> Best,
> Gloria
>
> On Tue, Feb 8, 2022 at 4:58 AM Anthony Towns <a...@erisian.com.au> wrote:
>
>> On Mon, Feb 07, 2022 at 11:16:26AM +0000, Gloria Zhao wrote:
>> > @aj:
>> > > I wonder sometimes if it could be sufficient to just have a relay rate
>> > > limit and prioritise by ancestor feerate though. Maybe something like:
>> > > - instead of adding txs to each peers setInventoryTxToSend
>> immediately,
>> > > set a mempool flag "relayed=false"
>> > > - on a time delay, add the top N (by fee rate) "relayed=false" txs to
>> > > each peer's setInventoryTxToSend and mark them as "relayed=true";
>> > > calculate how much kB those txs were, and do this again after
>> > > SIZE/RATELIMIT seconds
>>
>> > > - don't include "relayed=false" txs when building blocks?
>>
>> The "?" was me not being sure that point is a good suggestion...
>>
>> Miners might reasonably decide to have no rate limit, and always relay,
>> and never exclude txs -- but the question then becomes is whether they
>> hear about the tx at all, so rate limiting behaviour could still be a
>> potential problem for whoever made the tx.
>>
>> > Wow cool! I think outbound tx relay size-based rate-limiting and
>> > prioritizing tx relay by feerate are great ideas for preventing spammers
>> > from wasting bandwidth network-wide. I agree, this would slow the low
>> > feerate spam down, preventing a huge network-wide bandwidth spike. And
>> it
>> > would allow high feerate transactions to propagate as they should,
>> > regardless of how busy traffic is. Combined with inbound tx request
>> > rate-limiting, might this be sufficient to prevent DoS regardless of the
>> > fee-based replacement policies?
>>
>> I think you only want to do outbound rate limits, ie, how often you send
>> INV, GETDATA and TX messages? Once you receive any of those, I think
>> you have to immediately process / ignore it, you can't really sensibly
>> defer it (beyond the existing queues we have that just build up while
>> we're busy processing other things first)?
>>
>> > One point that I'm not 100% clear on: is it ok to prioritize the
>> > transactions by ancestor feerate in this scheme? As I described in the
>> > original post, this can be quite different from the actual feerate we
>> would
>> > consider a transaction in a block for. The transaction could have a high
>> > feerate sibling bumping its ancestor.
>> > For example, A (1sat/vB) has 2 children: B (49sat/vB) and C (5sat/vB).
>> If
>> > we just received C, it would be incorrect to give it a priority equal to
>> > its ancestor feerate (3sat/vB) because if we constructed a block
>> template
>> > now, B would bump A, and C's new ancestor feerate is 5sat/vB.
>> > Then, if we imagine that top N is >5sat/vB, we're not relaying C. If we
>> > also exclude C when building blocks, we're missing out on good fees.
>>
>> I think you're right that this would be ugly. It's something of a
>> special case:
>>
>> a) you really care about C getting into the next block; but
>> b) you're trusting B not being replaced by a higher fee tx that
>> doesn't have A as a parent; and
>> c) there's a lot of txs bidding the floor of the next block up to a
>> level in-between the ancestor fee rate of 3sat/vB and the tx fee
>> rate of 5sat/vB
>>
>> Without (a), maybe you don't care about it getting to a miner quickly.
>> If your trust in (b) was misplaced, then your tx's effective fee rate
>> will drop and (because of (c)), you'll lose anyway. And if the spam ends
>> up outside of (c)'s range, either the rate limiting won't take effect
>> (spam's too cheap) and you'll be fine, or you'll miss out on the block
>> anyway (spam's paying more than your tx rate) and you never had any hope
>> of making it in.
>>
>> Note that we already rate limit via INVENTORY_BROADCAST_MAX /
>> *_INVENTORY_BROADCAST_INTERVAL; which gets to something like 10,500 txs
>> per 10 minutes for outbound connections. This would be a weight based
>> rate limit instead-of/in-addition-to that, I guess.
>>
>> As far as a non-ugly approach goes, I think you'd have to be smarter about
>> tracking the "effective fee rate" than the ancestor fee rate manages;
>> maybe that's something that could fall out of Murch and Clara's candidate
>> set blockbuilding ideas [0] ?
>>
>> Perhaps that same work would also make it possible to come up with
>> a better answer to "do I care that this replacement would invalidate
>> these descendents?"
>>
>> [0] https://github.com/Xekyo/blockbuilding
>>
>> > > - keep high-feerate evicted txs around for a while in case they get
>> > > mined by someone else to improve compact block relay, a la the
>> > > orphan pool?
>> > Replaced transactions are already added to vExtraTxnForCompact :D
>>
>> I guess I was thinking that it's just a 100 tx LRU cache, which might
>> not be good enough?
>>
>> Maybe it would be more on point to have a rate limit apply only to
>> replacement transactions?
>>
>> > For wallets, AJ's "All you need is for there to be *a* path that follows
>> > the new relay rules and gets from your node/wallet to perhaps 10% of
>> > hashpower" makes sense to me (which would be the former).
>>
>> Perhaps a corollarly of that is that it's *better* to have the mempool
>> acceptance rule only consider economic incentives, and have the spam
>> prevention only be about "shall I tell my peers about this?"
>>
>> If you don't have that split; then the anti-spam rules can prevent you
>> from getting the tx in the mempool at all; whereas if you do have the
>> split, then even if the bitcoind anti-spam rules are blocking you at
>> every turn, you can still send your tx to miners by some other route,
>> and then they can add it to their mempool directly without any hassle.
>>
>> Cheers,
>> aj
>>
>> _______________________________________________
> bitcoin-dev mailing list
> bitcoin-dev@lists.linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
>
_______________________________________________
bitcoin-dev mailing list
bitcoin-dev@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
