Hi folks,
I'm kind of new to Asterisk and looking for a little advice.
I'm setting up an Asterisk box in front of a Toshiba PBX using a Digium
Wildcard TE410P Quad Span T1 card.
Right now all I want Asterisk to do is work as a router moving all calls
through it without the PBX recognizing it.
My zaptel.conf and Zapata.conf are set up as can be scene below.
I'm looking for advice on setting up the dial plan.
[EMAIL PROTECTED] /etc/zaptel.conf
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
loadzone=us
defaultzone=us
[EMAIL PROTECTED] /etc/asterisk/zapata.conf
switchtype=dms100
signalling=pri_cpe
switchtype=dms100
signalling=pri_cpe
group=1
channel=>1-23
switchtpe=dms100
signalling=pri_net
group=2
channel=>25-47
If anyone out there has any advice it would be much appreciated.
Thanks
Luke Kahtava
