tree 2a975a06793c5cd8303f0e4c4d3b474d4ed7d5f6 parent 03938c3f1062b0f279a0ef937a471d4db83702ed author Dave Jones <[EMAIL PROTECTED]> Thu, 28 Jul 2005 23:40:04 -0700 committer Dave Jones <[EMAIL PROTECTED]> Thu, 28 Jul 2005 23:40:04 -0700
Opteron revision F will support higher frequencies than can be encoded in the current driver's 4 bit frequency field. This patch updates the driver to support Rev F including 6 bit FIDs and processor ID updates. This should apply cleanly whether or not the dual-core bugfix I sent out last week is applied. I'd prefer that both get applied, of course. Signed-off-by: David Keck <[EMAIL PROTECTED]> Signed-off-by: Mark Langsdorf <[EMAIL PROTECTED]> Signed-off-by: Dave Jones <[EMAIL PROTECTED]> arch/i386/kernel/cpu/cpufreq/powernow-k8.c | 29 ++++++++++++---------------- arch/i386/kernel/cpu/cpufreq/powernow-k8.h | 30 ++++++++++++++++------------- 2 files changed, 30 insertions(+), 29 deletions(-) diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1,5 +1,5 @@ /* - * (c) 2003, 2004 Advanced Micro Devices, Inc. + * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html @@ -44,7 +44,7 @@ #define PFX "powernow-k8: " #define BFX PFX "BIOS error: " -#define VERSION "version 1.40.4" +#define VERSION "version 1.50.3" #include "powernow-k8.h" /* serialize freq changes */ @@ -232,7 +232,7 @@ static int write_new_vid(struct powernow /* * Reduce the vid by the max of step or reqvid. * Decreasing vid codes represent increasing voltages: - * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off. + * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. */ static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) { @@ -467,7 +467,7 @@ static int check_supported_cpu(unsigned eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || ((eax & CPUID_XFAM) != CPUID_XFAM_K8) || - ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) { + ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) { printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); goto out; } @@ -696,6 +696,7 @@ static void powernow_k8_acpi_pst_values( data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; + data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; @@ -735,8 +736,13 @@ static int powernow_k8_cpu_init_acpi(str } for (i = 0; i < data->acpi_data.state_count; i++) { - u32 fid = data->acpi_data.states[i].control & FID_MASK; - u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + if (data->exttype) { + u32 fid = data->acpi_data.states[i].status & FID_MASK; + u32 vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK; + } else { + u32 fid = data->acpi_data.states[i].control & FID_MASK; + u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + } dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); @@ -753,7 +759,7 @@ static int powernow_k8_cpu_init_acpi(str } /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ - if (vid == 0x1f) { + if (vid == VID_OFF) { dprintk("invalid vid %u, ignoring\n", vid); powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; continue; @@ -930,15 +936,6 @@ static int powernowk8_target(struct cpuf down(&fidvid_sem); - for_each_cpu_mask(i, cpu_core_map[pol->cpu]) { - /* make sure the sibling is initialized */ - if (!powernow_data[i]) { - ret = 0; - up(&fidvid_sem); - goto err_out; - } - } - powernow_k8_acpi_pst_values(data, newstate); if (transition_frequency(data, newstate)) { diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h @@ -1,5 +1,5 @@ /* - * (c) 2003, 2004 Advanced Micro Devices, Inc. + * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc. * Your use of this code is subject to the terms and conditions of the * GNU general public license version 2. See "COPYING" or * http://www.gnu.org/licenses/gpl.html @@ -19,6 +19,7 @@ struct powernow_k8_data { u32 vidmvs; /* usable value calculated from mvs */ u32 vstable; /* voltage stabilization time, units 20 us */ u32 plllock; /* pll lock time, units 1 us */ + u32 exttype; /* extended interface = 1 */ /* keep track of the current fid / vid */ u32 currvid, currfid; @@ -41,7 +42,7 @@ struct powernow_k8_data { #define CPUID_XFAM 0x0ff00000 /* extended family */ #define CPUID_XFAM_K8 0 #define CPUID_XMOD 0x000f0000 /* extended model */ -#define CPUID_XMOD_REV_E 0x00020000 +#define CPUID_XMOD_REV_F 0x00040000 #define CPUID_USE_XFAM_XMOD 0x00000f00 #define CPUID_GET_MAX_CAPABILITIES 0x80000000 #define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 @@ -57,25 +58,26 @@ struct powernow_k8_data { /* Field definitions within the FID VID Low Control MSR : */ #define MSR_C_LO_INIT_FID_VID 0x00010000 -#define MSR_C_LO_NEW_VID 0x00001f00 -#define MSR_C_LO_NEW_FID 0x0000002f +#define MSR_C_LO_NEW_VID 0x00003f00 +#define MSR_C_LO_NEW_FID 0x0000003f #define MSR_C_LO_VID_SHIFT 8 /* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff +#define MSR_C_HI_STP_GNT_TO 0x000fffff /* Field definitions within the FID VID Low Status MSR : */ -#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ -#define MSR_S_LO_MAX_RAMP_VID 0x1f000000 +#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ +#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 #define MSR_S_LO_MAX_FID 0x003f0000 #define MSR_S_LO_START_FID 0x00003f00 #define MSR_S_LO_CURRENT_FID 0x0000003f /* Field definitions within the FID VID High Status MSR : */ -#define MSR_S_HI_MAX_WORKING_VID 0x001f0000 -#define MSR_S_HI_START_VID 0x00001f00 -#define MSR_S_HI_CURRENT_VID 0x0000001f -#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 +#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 +#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 +#define MSR_S_HI_START_VID 0x00003f00 +#define MSR_S_HI_CURRENT_VID 0x0000003f +#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 /* * There are restrictions frequencies have to follow: @@ -99,13 +101,15 @@ struct powernow_k8_data { #define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ #define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ -#define LEAST_VID 0x1e /* Lowest (numerically highest) useful vid value */ +#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ #define MIN_FREQ 800 /* Min and max freqs, per spec */ #define MAX_FREQ 5000 #define INVALID_FID_MASK 0xffffffc1 /* not a valid fid if these bits are set */ -#define INVALID_VID_MASK 0xffffffe0 /* not a valid vid if these bits are set */ +#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ + +#define VID_OFF 0x3f #define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ - To unsubscribe from this list: send the line "unsubscribe bk-commits-head" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
