#6696: sg3_utils-1.41
-------------------------+-----------------------
Reporter: fo | Owner: renodr
Type: enhancement | Status: assigned
Priority: normal | Milestone: 7.8
Component: BOOK | Version: SVN
Severity: normal | Resolution:
Keywords: |
-------------------------+-----------------------
Description changed by renodr:
Old description:
> [http://sg.danny.cz/sg/p/sg3_utils-1.41.tar.xz]
>
> [https://github.com/hreinecke/sg3_utils/blob/master/ChangeLog]
>
> and
>
> [https://raw.githubusercontent.com/hreinecke/sg3_utils/master/ChangeLog]
>
> {{{
> Changelog for sg3_utils-1.41 [20150119] [svn: r631]
> - sg_zone: new utility for open, close and finish
> zone commands introduced in zbc-r02
> - sg_rep_zones and sg_reset_wp: change opcodes as
> indicated in zbc-r02
> - sg_read_buffer: add READ BUFFER(16) support (spc5r02)
> - sg_logs: add --enumerate and acronyms
> - allow decode from hex or binary in file
> - decode environmental reporting + limits lpages
> - sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
> plus support for zoning service actions
> - sg_inq+sg_vpd: fix SCSI name string decoding in
> device identification VPD page (0x83)
> - increase sanity on Unit Serial number VPD page
> - sg_inq: improve NAA handling in dev_id VPD page
> - update version descriptor list to 20141221
> - sg_vpd: add atomic boundary values (sbc4r04)
> - block limits VPD page: fix unmap granularity
> alignment value; spc5r02 additions
> - sg_readcap: add support for ZBC's rc_basis field
> - sg_senddiag: fix bug with --raw option
> - sg_ses: enclosure element: add failure and warning
> acronyms, fix warning indication output
> - additional element status dpage: add PCIe/NVMe
> - rescan-scsi-bus.sh: add --issue-lip-wait option and
> improve error handling
> - sg_modes: make '-HHH' output suitable as input to
> 'sdparm --inhex='
> - scsi_logging_level: replace use of tr command
> - sg_lib_data: sync asc/ascq codes with T10 20150103
> }}}
New description:
[http://sg.danny.cz/sg/p/sg3_utils-1.41.tar.xz]
[https://github.com/hreinecke/sg3_utils/blob/master/ChangeLog]
and
[https://raw.githubusercontent.com/hreinecke/sg3_utils/master/ChangeLog]
MD5: 79c8e3c0b2e4bad7dcba3e1ab090f3b4
{{{
Changelog for sg3_utils-1.41 [20150119] [svn: r631]
- sg_zone: new utility for open, close and finish
zone commands introduced in zbc-r02
- sg_rep_zones and sg_reset_wp: change opcodes as
indicated in zbc-r02
- sg_read_buffer: add READ BUFFER(16) support (spc5r02)
- sg_logs: add --enumerate and acronyms
- allow decode from hex or binary in file
- decode environmental reporting + limits lpages
- sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
plus support for zoning service actions
- sg_inq+sg_vpd: fix SCSI name string decoding in
device identification VPD page (0x83)
- increase sanity on Unit Serial number VPD page
- sg_inq: improve NAA handling in dev_id VPD page
- update version descriptor list to 20141221
- sg_vpd: add atomic boundary values (sbc4r04)
- block limits VPD page: fix unmap granularity
alignment value; spc5r02 additions
- sg_readcap: add support for ZBC's rc_basis field
- sg_senddiag: fix bug with --raw option
- sg_ses: enclosure element: add failure and warning
acronyms, fix warning indication output
- additional element status dpage: add PCIe/NVMe
- rescan-scsi-bus.sh: add --issue-lip-wait option and
improve error handling
- sg_modes: make '-HHH' output suitable as input to
'sdparm --inhex='
- scsi_logging_level: replace use of tr command
- sg_lib_data: sync asc/ascq codes with T10 20150103
}}}
--
--
Ticket URL: <http://wiki.linuxfromscratch.org/blfs/ticket/6696#comment:2>
BLFS Trac <http://wiki.linuxfromscratch.org/blfs>
Beyond Linux From Scratch
--
http://lists.linuxfromscratch.org/listinfo/blfs-book
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
