Hi, I have finished building the part of BLFS I required to get full
build from the systemd source package and have also updated gcc-4.8.2
instructions.
The attached patch contains changes I made. I only ask the patch to be
applied without any changes and then the changes can be made later if
necessary so I can see what was I doing wrong (no hard feelings here).
All packages were run with testsuites (yeah, I can't believe it either),
so I had to build a bit more packages than I actually needed. I still
can't get glib testsuite to finish ... It has been running for half an
hour yet. If it finishes, I'll post the result.
The build logs of current BLFS packages that I have built are available at:
http://www.linuxfromscratch.org/~krejzi/7.5-systemd-rc1/logs/postlfs/
If the glib manages to complete today, I'll post it too.
--
Note: My last name is not Krejzi.
Index: general/genlib/dbus-glib.xml
===================================================================
--- general/genlib/dbus-glib.xml (revision 12726)
+++ general/genlib/dbus-glib.xml (working copy)
@@ -35,7 +35,7 @@
<application>D-Bus</application> API.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
@@ -98,9 +98,8 @@
commands:
</para>
-<screen><userinput>./configure --prefix=/usr \
- --sysconfdir=/etc \
- --libexecdir=/usr/lib/dbus-1.0 \
+<screen><userinput>./configure --prefix=/usr \
+ --sysconfdir=/etc \
--disable-static &&
make</userinput></screen>
Index: general/genlib/gobject-introspection.xml
===================================================================
--- general/genlib/gobject-introspection.xml (revision 12726)
+++ general/genlib/gobject-introspection.xml (working copy)
@@ -37,7 +37,7 @@
machine readable format.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/genlib/js.xml
===================================================================
--- general/genlib/js.xml (revision 12726)
+++ general/genlib/js.xml (working copy)
@@ -36,7 +36,7 @@
written in C/C++.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/genlib/libgcrypt.xml
===================================================================
--- general/genlib/libgcrypt.xml (revision 12726)
+++ general/genlib/libgcrypt.xml (working copy)
@@ -38,7 +38,7 @@
API.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/genlib/libgpg-error.xml
===================================================================
--- general/genlib/libgpg-error.xml (revision 12726)
+++ general/genlib/libgpg-error.xml (working copy)
@@ -35,7 +35,7 @@
<application>GnuPG</application> components.
.</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/genlib/nspr.xml
===================================================================
--- general/genlib/nspr.xml (revision 12726)
+++ general/genlib/nspr.xml (working copy)
@@ -36,7 +36,7 @@
platform-neutral API for system level and libc like functions.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/graphlib/freetype2.xml
===================================================================
--- general/graphlib/freetype2.xml (revision 12726)
+++ general/graphlib/freetype2.xml (working copy)
@@ -41,7 +41,7 @@
<application>TrueType</application> fonts.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/prog/dbus-python.xml
===================================================================
--- general/prog/dbus-python.xml (revision 12726)
+++ general/prog/dbus-python.xml (working copy)
@@ -29,7 +29,7 @@
<application>D-Bus</application>.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect4">Package Information</bridgehead>
<itemizedlist spacing="compact">
@@ -107,8 +107,7 @@
<screen><userinput>mkdir python2 &&
pushd python2 &&
PYTHON=/usr/bin/python \
-../configure --prefix=/usr \
- --docdir=/usr/share/doc/dbus-python-&dbus-python-version; &&
+../configure --prefix=/usr --docdir=/usr/share/doc/dbus-python-&dbus-python-version; &&
make &&
popd</userinput></screen>
@@ -125,8 +124,7 @@
<screen><userinput>mkdir python3 &&
pushd python3 &&
PYTHON=/usr/bin/python3 \
-../configure --prefix=/usr \
- --docdir=/usr/share/doc/dbus-python-&dbus-python-version; &&
+../configure --prefix=/usr --docdir=/usr/share/doc/dbus-python-&dbus-python-version; &&
make &&
popd</userinput></screen>
Index: general/prog/gcc.xml
===================================================================
--- general/prog/gcc.xml (revision 12726)
+++ general/prog/gcc.xml (working copy)
@@ -8,8 +8,8 @@
<!ENTITY gcc-download-ftp "ftp://ftp.gnu.org/gnu/gcc/gcc-&gcc-version;/gcc-&gcc-version;.tar.bz2";>
<!ENTITY gcc-md5sum "a3d7d63b9cb6b6ea049469a0c4a43c9d">
<!ENTITY gcc-size "82 MB">
- <!ENTITY gcc-buildsize "~2.9 GB (build, test and install all compilers except GNAT)">
- <!ENTITY gcc-time "80 SBU (build, test and install all compilers except GNAT)">
+ <!ENTITY gcc-buildsize "6.6 GB">
+ <!ENTITY gcc-time "110 SBU">
<!ENTITY gnat-download-http "https://libre.adacore.com/download/";>
<!-- We don't know what platform, so this is commented out
@@ -44,7 +44,7 @@
Many consider the Iced Tea version to be a more robust Java environment
than the one provided by <application>GCC</application>.</para>
- &lfs74_checked;
+ &lfs75_checked;
<caution>
<para>If you are upgrading <application>GCC</application> from any other
@@ -85,9 +85,6 @@
<bridgehead renderas="sect3">GCC Dependencies</bridgehead>
- <bridgehead renderas="sect4">Recommended</bridgehead>
- <para role="recommended"><xref linkend="dejagnu"/></para>
-
<bridgehead renderas="sect4">Required if building java</bridgehead>
<para role="required">
<xref linkend="zip"/>,
@@ -95,6 +92,11 @@
<xref linkend="which"/>
</para>
+ <bridgehead renderas="sect4">Recommended</bridgehead>
+ <para role="recommended">
+ <xref linkend="dejagnu"/>
+ </para>
+
<note>
<para>If you plan to compile Ada, you will need to install
<application>GNAT</application> temporarily to satisfy the circular
@@ -103,8 +105,7 @@
2013, then select the file to download. You probably want the x86-linux
or x86_64-linux file.</para>
</note>
-<!-- Using 2011, because 2012 does not compile GCC-4.7.2
- GCC-4.8.1 and gnat 2013 work OK -->
+
<bridgehead renderas="sect3">GNAT GPL 2013 Package Information</bridgehead>
<itemizedlist spacing="compact">
<listitem>
@@ -163,11 +164,7 @@
<sect2 role="installation">
<title>Installation of GCC</title>
- <para>Install <application>GCC</application> by running the
- following commands:</para>
-
<important>
-
<para>The installation process may overwrite your existing
<application>GCC</application> <command>gcc</command> and
<command>c++</command> compilers and libraries. Having the
@@ -183,23 +180,28 @@
refer to the information found in the <application>GCC</application>
section of Chapter 6 in the LFS book (<ulink
url="&lfs-root;/chapter06/gcc.html"/>).</para>
-
</important>
- <para>The instructions below let the build machinery perform a
- <quote>bootstrap</quote> intentionally. This is necessary if you
- install the <application>Ada</application> compiler anyway. Even
- if you don't, a bootstrap is recommended for robustness.</para>
+ <para>The instructions below will make sure that <quote>bootstrap</quote>
+ is preformed intentionally. This is necessary if the
+ <application>Ada</application> compiler is being built anyway. Even if it
+ isn't, a bootstrap is recommended for robustness. To disable bootstrap
+ anyways, pass <parameter>--disable-bootstrap</parameter> to the
+ <command>./configure</command> options below.</para>
+ <para>Install <application>GCC</application> by running the
+ following commands:</para>
+
<screen><userinput>sed -i 's/\(install.*:\) install-.*recursive/\1/' libffi/Makefile.in &&
sed -i 's/\(install-data-am:\).*/\1/' libffi/include/Makefile.in &&
-sed -i 's/install_to_$(INSTALL_DEST) //' libiberty/Makefile.in &&
-sed -i 's@\./fixinc\.sh@-c true@' gcc/Makefile.in &&
case `uname -m` in
i?86) sed -i 's/^T_CFLAGS =$/& -fomit-frame-pointer/' gcc/Makefile.in ;;
esac &&
+sed -i -e /autogen/d -e /check.sh/d fixincludes/Makefile.in
+mv -v libmudflap/testsuite/libmudflap.c++/pass41-frag.cxx{,.disable}
+
mkdir ../gcc-build &&
cd ../gcc-build &&
@@ -206,27 +208,23 @@
../gcc-&gcc-version;/configure \
--prefix=/usr \
--libdir=/usr/lib \
- --libexecdir=/usr/lib \
--enable-shared \
--enable-threads=posix \
--enable-__cxa_atexit \
+ --enable-clocale=gnu \
--disable-multilib \
- --disable-bootstrap \
- --disable-install-libiberty \
--with-system-zlib \
- --enable-clocale=gnu \
--enable-lto \
--enable-languages=c,c++,fortran,ada,go,java,objc,obj-c++ &&
-make
-</userinput></screen>
+make</userinput></screen>
- <para>If you have installed additional packages such as valgrind and gdb,
- the gcc part of the testsuite will run more tests than in LFS.
- Some of those will report FAIL and others XPASS (pass when expected
- to FAIL). To run the checks:</para>
+ <para>If you have installed additional packages such as
+ <application>Valgrind</application> and <application>GDB</application>,
+ the <application>GCC</application> part of the testsuite will run more
+ tests than in LFS. Some of those will report FAIL and others XPASS
+ (pass when expected to FAIL). To run the tests, issue:</para>
-<screen><userinput>
-ulimit -s 32768 &&
+<screen><userinput>ulimit -s 32768 &&
make -k check &&
../gcc-&gcc-version;/contrib/test_summary</userinput></screen>
@@ -238,18 +236,13 @@
ln -v -sf ../usr/bin/cpp /lib &&
ln -v -sf gcc /usr/bin/cc &&
+mkdir -pv /usr/share/gdb/auto-load/usr/lib &&
+mv -v /usr/lib/*gdb.py /usr/share/gdb/auto-load/usr/lib &&
+
chown -v -R root:root \
/usr/lib/gcc/*linux-gnu/&gcc-version;/include{,-fixed} \
/usr/lib/gcc/*linux-gnu/&gcc-version;/ada{lib,include}</userinput></screen>
-<!-- Not needed since we do not install libffi
- <para>The <filename class='libraryfile'>libffi</filename> interface header
- is installed in a location where other packages will not be able to find
- it. If you included Java as one of the installed languages, create a
- symbolic link in <filename class='directory'>/usr/include</filename> to
- remedy this:</para>
-<screen role="root"><userinput>ln -v -sf `find /usr/lib/gcc -name ffitarget.h` /usr/include</userinput></screen>-->
-
<para>You should now remove the <application>GNAT</application>
installation and perform other cleanups:</para>
@@ -265,8 +258,8 @@
<para>The first two <command>sed</command> commands prevent the
installation of the <application>libffi</application> library bundled
with <application>GCC</application>, since it is outdated compared to
- <xref linkend="libffi"/>. The three other <command>sed</command> commands
- are the same ones used during the build of LFS.</para>
+ <xref linkend="libffi"/>. The following three commands are the same
+ ones used during the build of LFS.</para>
<para><command>mkdir ../gcc-build; cd ../gcc-build</command>: The
<application>GCC</application> documentation recommends
@@ -276,23 +269,18 @@
--enable-__cxa_atexit</parameter>: These parameters are required to build
the <application>C++</application> libraries to published standards.</para>
+ <para><parameter>--enable-clocale=gnu</parameter>: This parameter is a
+ failsafe for incomplete locale data.</para>
+
<para><parameter>--disable-multilib</parameter>: This parameter ensures
that files are created for the specific architecture of your computer.</para>
-<!-- Double dashes are forbidden in comments, so use "- -". Change it to
- double dash if you ever remove this comment!
- <para><parameter>- -enable-bootstrap</parameter>: This parameter is used
- so that a bootstrap installation is performed.</para>
--->
- <para><parameter>--enable-clocale=gnu</parameter>: This parameter is a
- failsafe for incomplete locale data.</para>
-
<para><parameter>--enable-lto</parameter>: Setting this parameter allows
- to build a compiler which is able to perform <quote>link time
- optimization (lto)</quote>.</para>
+ to build a compiler which is able to perform <quote>Link Time
+ Optimization (LTO)</quote>.</para>
<para>
- <parameter>--enable-languages=c,c++,fortran,java,objc,obj-c++,ada,go</parameter>:
+ <parameter>--enable-languages=c,c++,fortran,ada,go,java,objc,obj-c++</parameter>:
This command identifies which languages to build. You may modify
this command to remove undesired languages.</para>
@@ -310,7 +298,7 @@
<para><command>ln -v -sf ../usr/bin/cpp /lib</command>: This command
creates a link to the C PreProcessor as some packages expect it to be
- installed in the <filename class='directory'>/lib</filename>
+ installed in the <filename class="directory">/lib</filename>
directory.</para>
<para><command>ln -v -sf gcc /usr/bin/cc</command>: This link is created as
@@ -319,8 +307,8 @@
<para><command>chown -v -R root:root
/usr/lib/gcc/*linux-gnu/...</command>:
If the package is built by a user other than root, the ownership of the
- installed <filename class='directory'>include</filename> and
- <filename class='directory'>adalib</filename> directories (and their
+ installed <filename class="directory">include</filename> and
+ <filename class="directory">adalib</filename> directories (and their
contents) will be incorrect. These commands change the ownership to the
<systemitem class="username">root</systemitem> user and group . Omit the
command changing the Ada directories if you did not include Ada as one of
@@ -337,21 +325,27 @@
<segtitle>Installed Directories</segtitle>
<seglistitem>
- <seg>aot-compile, gappletviewer, gc-analyze, gccgo, gcj, gcj-dbtool,
- gcjh, gfortran, gij, gjar, gjarsigner, gjavah, gkeytool,
- gnat, gnatbind, gnatchop, gnatclean, gnatfind, gnative2ascii, gnatkr,
- gnatlink, gnatls, gnatmake, gnatname, gnatprep, gnatxref, gorbd,
- grmic, grmid, grmiregistry, gserialver, gtnameserv, jcf-dump,
- jv-convert, rebuild-gcj-db, and architecture specific names</seg>
- <seg>libgcj_bc.so, libgcj.so, libgcj-tools.so, libgfortran.{so,a},
- libgij.so, libgo.{so,a}, libgobegin.a, libobjc.{so,a} and numerous other
- run-time libraries and executables in /usr/lib/gcc</seg>
- <seg>/usr/include/c++/&gcc-version;/{gcj,gnu,java,javax,org,sun},
- /usr/lib/gcc/<arch-model>-linux-gnu/&gcc-version;/ada{include,lib},
- /usr/lib/gcj-&gcc-version;-13,
- /usr/lib/go,
- /usr/lib/security,
- and /usr/share/java</seg>
+ <seg>
+ aot-compile, gappletviewer, gc-analyze, gccgo, gcj, gcj-dbtool,
+ gcjh, gfortran, gij, gjar, gjarsigner, gjavah, gkeytool,
+ gnat, gnatbind, gnatchop, gnatclean, gnatfind, gnative2ascii, gnatkr,
+ gnatlink, gnatls, gnatmake, gnatname, gnatprep, gnatxref, gorbd,
+ grmic, grmid, grmiregistry, gserialver, gtnameserv, jcf-dump,
+ jv-convert, rebuild-gcj-db, and architecture specific names
+ </seg>
+ <seg>
+ libgcj_bc.so, libgcj.so, libgcj-tools.so, libgfortran.{so,a},
+ libgij.so, libgo.{so,a}, libgobegin.a, libobjc.{so,a} and numerous other
+ run-time libraries and executables in /usr/lib/gcc and /usr/libexec/gcc
+ </seg>
+ <seg>
+ /usr/include/c++/&gcc-version;/{gcj,gnu,java,javax,org,sun},
+ /usr/lib/gcc/<arch-model>-linux-gnu/&gcc-version;/ada{include,lib},
+ /usr/lib/gcj-&gcc-version;-13,
+ /usr/lib/go,
+ /usr/lib/security, and
+ /usr/share/java
+ </seg>
</seglistitem>
</segmentedlist>
Index: general/prog/py2cairo.xml
===================================================================
--- general/prog/py2cairo.xml (revision 12726)
+++ general/prog/py2cairo.xml (working copy)
@@ -30,7 +30,7 @@
<application>Cairo</application>.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect4">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: general/prog/pygobject2.xml
===================================================================
--- general/prog/pygobject2.xml (revision 12726)
+++ general/prog/pygobject2.xml (working copy)
@@ -32,7 +32,7 @@
<application>GLib</application>.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect4">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: networking/connect/dhcp.xml
===================================================================
--- networking/connect/dhcp.xml (revision 12726)
+++ networking/connect/dhcp.xml (working copy)
@@ -37,7 +37,7 @@
network addresses on private networks.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: postlfs/editors/nano.xml
===================================================================
--- postlfs/editors/nano.xml (revision 12726)
+++ postlfs/editors/nano.xml (working copy)
@@ -35,7 +35,7 @@
the default editor in the <application>Pine</application> package.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: postlfs/security/cracklib.xml
===================================================================
--- postlfs/security/cracklib.xml (revision 12726)
+++ postlfs/security/cracklib.xml (working copy)
@@ -38,7 +38,7 @@
library used to enforce strong passwords by comparing user selected
passwords to words in chosen word lists.</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
@@ -122,8 +122,8 @@
<para>Now, as the <systemitem class="username">root</systemitem> user:</para>
<screen role="root"><userinput>make install &&
-mv -v /usr/lib/libcrack.so.2* /lib &&
-ln -v -sf ../../lib/libcrack.so.2.9.0 /usr/lib/libcrack.so</userinput></screen>
+mv -v /usr/lib/libcrack.so.* /lib &&
+ln -sfv ../../lib/$(readlink /usr/lib/libcrack.so) /usr/lib/libcrack.so</userinput></screen>
<para>Issue the following commands as the
<systemitem class="username">root</systemitem> user to install the
Index: postlfs/security/linux-pam.xml
===================================================================
--- postlfs/security/linux-pam.xml (revision 12726)
+++ postlfs/security/linux-pam.xml (working copy)
@@ -41,7 +41,7 @@
users.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
@@ -140,8 +140,7 @@
--sysconfdir=/etc \
--libdir=/usr/lib \
--enable-securedir=/lib/security \
- --docdir=/usr/share/doc/Linux-PAM-&linux-pam-version; \
- --disable-nis &&
+ --docdir=/usr/share/doc/Linux-PAM-&linux-pam-version; &&
make</userinput></screen>
<para>
@@ -224,13 +223,6 @@
</para>
<para>
- <option>--disable-nis</option>: This switch disables building
- of the Network Information Service/Yellow Pages support in
- pam_unix and pam_access modules. Remove it if you have installed
- <xref linkend="libtirpc"/>.
- </para>
-
- <para>
<command>chmod -v 4755 /sbin/unix_chkpwd</command>:
The <command>unix_chkpwd</command> helper program must be setuid
so that non-<systemitem class="username">root</systemitem>
Index: postlfs/security/polkit.xml
===================================================================
--- postlfs/security/polkit.xml (revision 12726)
+++ postlfs/security/polkit.xml (working copy)
@@ -36,7 +36,7 @@
communicate with privileged processes.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
@@ -132,10 +132,8 @@
<screen><userinput>./configure --prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
- --with-authfw=shadow \
--disable-static \
- --libexecdir=/usr/lib/polkit-1 &&
-
+ --with-authfw=shadow &&
make</userinput></screen>
<para>
Index: postlfs/security/shadow.xml
===================================================================
--- postlfs/security/shadow.xml (revision 12726)
+++ postlfs/security/shadow.xml (working copy)
@@ -41,7 +41,7 @@
<command>login</command> and <command>su</command> to utilize PAM.
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: pst/xml/docbook-xsl.xml
===================================================================
--- pst/xml/docbook-xsl.xml (revision 12726)
+++ pst/xml/docbook-xsl.xml (working copy)
@@ -39,7 +39,7 @@
package contains XSL stylesheets. These are useful for
performing transformations on XML DocBook files.</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: pst/xml/docbook.xml
===================================================================
--- pst/xml/docbook.xml (revision 12726)
+++ pst/xml/docbook.xml (working copy)
@@ -35,7 +35,7 @@
and software documentation to a standard allowing you to utilize
transformations already written for that standard.</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
Index: x/lib/cairo.xml
===================================================================
--- x/lib/cairo.xml (revision 12726)
+++ x/lib/cairo.xml (working copy)
@@ -47,7 +47,7 @@
transformation</ulink> (scale, rotation, shear, etc.).
</para>
- &lfs74_checked;
+ &lfs75_checked;
<bridgehead renderas="sect3">Package Information</bridgehead>
<itemizedlist spacing="compact">
--
http://linuxfromscratch.org/mailman/listinfo/blfs-dev
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
