Dear Mike , Thank you for your response.
I read your post, and as you said it is not the problem I have, but it was good to read it. Regarding the (ALT-CTRL-BKS), as I tried it still work with Xorg-7. I've tried many things to make it run , but all failed . Note that my existing OS, which I compiled from, is Fedora-13 and it has no problem with this hardware. Any help? > Date: Fri, 15 Oct 2010 10:25:07 -0400 > From: [email protected] > To: [email protected] > Subject: Re: Xorg Problem with Intel DH55HC VGA > > On Fri, Oct 15, 2010 at 12:56:41PM +0000, Mark Mark wrote: > > > > Hello Everyone > > I am working on BLFS-6.3 , on a X86_64 bit machine, DH55HC Intel > > motherboard , with onboard VGA. > > When trying to start Xorg, or to test the configuration the screen hangs > > up, and no response from the PC, even (ALT+CTRL+Bkspce) is not working. > > I installed the intel driver , and choose the "intel" as driver in > > xorg.conf , but same .. > > I also used a new kernel : linux-kernel-2.6.34.2 . > > I noticed that in Xorg.conf I have the following error: > > > > (EE) AIGLX: Screen 0 is not DRI capable > > Unsubscribe: See the above information page > > Read my posts "Chapter 23 - Xorg Utilities" in this months list. That > may not be your problem, but it's worth a look. I don't believe > (ALT+CTRL+Bks) works on Xorg-7 anymore without some modifications . > Good luck. > > ---- Mike Hollis ----- > > > > > -- > http://linuxfromscratch.org/mailman/listinfo/blfs-support > FAQ: http://www.linuxfromscratch.org/blfs/faq.html > Unsubscribe: See the above information page
-- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
