Are you sure that your computer is set to boot from c d in the bios? Jim At 09:33 AM 4/16/2009 +0200, you wrote: >Unfortunately don't know any of those packages except Power ISO, but I only >really used it to extract content from ISO images, and I now rather use >MagicISO to virtually mount them (using MagicDisk). > >I also wrote the Vinux image to CD, but used Nero for that, and it worked >fine, so not sure what's causing this problem, but you could try extracting >the content to somewhere on your HDD and see if that shows problems which >might tell you if there's a problem with the image file itsself, and then >try writing that content to a CD using even the built in windows copy/paste >functionality and see if that works. > >Stay well > >Jacob Kruger >Blind Biker >Skype: BlindZA >'...fate had broken his body, but not his spirit...' > >----- Original Message ----- >From: "Chris Hallsworth" <christopher...@googlemail.com> >To: <blind-computing@jaws-users.com> >Sent: Wednesday, April 15, 2009 8:27 PM >Subject: [Blind-Computing] Burning Vinux to a CD-RW > > >> Hello all, >> I'm trying to burn Vinux onto a CD-RW. I've tried UltraIso, PowerIso and >> IMGburn. It seems to burn fine, but with two programs (UltraIso and >> IMGburn)I get problems verifying the disk. IMGburn even tells me some >> diagnostic but cryptic messages, and also told me that one of the sectors >> is smaller than the sectors in the image. Does this therefore mean that >> the disk is at fault, and if so should I try another disk, as I've got ten >> in total, all CD-RW's? All help would be greatly appreciated as this is >> driving me mad! P.S. Oh yes, the problem is it burns ok, but when I try to >> start it with the computer it doesn't seem to boot properly and I no doubt >> get an error message, to which I've got no eyeballs to help me read it. >> Thanks in advance, as this is driving me mad! >> >> -- >> Chris Hallsworth >> e-mail: christopher...@googlemail.com >> MSN: ch9...@hotmail.com >> Skype: chrishallsworth7266 >> Join deaf blind support by sending a blank message to >> deaf-blind-support+subscr...@googlegroups.com >> >> Visit the JAWS Users List home page at: >> http://www.jaws-users.com >> Visit the Blind Computing home page at: >> http://www.blind-computing.com >> Address for the list archives: >> http://www.mail-archive.com/blind-computing@jaws-users.com/ >> To post to this group, send email to >> blind-computing@jaws-users.com >> To unsubscribe from this group, send an email to >> blind-computing-le...@jaws-users.com >> For help from Mailman with your account Put the word help in the subject >> or body of a blank message to: >> blind-computing-requ...@jaws-users.com >> Use the following address in order to contact the management team >> blind-computing-ow...@jaws-users.com >> If you wish to join the JAWS Users List send a blank email to the >> following address: >> jaws-users-list-j...@jaws-users.com >> >> __________ Information from ESET NOD32 Antivirus, version of virus >> signature database 4012 (20090416) __________ >> >> The message was checked by ESET NOD32 Antivirus. >> >> http://www.eset.com >> >> >> > > > Visit the JAWS Users List home page at: > http://www.jaws-users.com >Visit the Blind Computing home page at: >http://www.blind-computing.com > Address for the list archives: > http://www.mail-archive.com/blind-computing@jaws-users.com/ > To post to this group, send email to > blind-computing@jaws-users.com > To unsubscribe from this group, send an email to > blind-computing-le...@jaws-users.com > For help from Mailman with your account Put the word help in the subject > or body of a blank message to: > blind-computing-requ...@jaws-users.com >Use the following address in order to contact the management team >blind-computing-ow...@jaws-users.com >If you wish to join the JAWS Users List send a blank email to the > following address: > jaws-users-list-j...@jaws-users.com >
Visit the JAWS Users List home page at: http://www.jaws-users.com Visit the Blind Computing home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/blind-computing@jaws-users.com/ To post to this group, send email to blind-computing@jaws-users.com To unsubscribe from this group, send an email to blind-computing-le...@jaws-users.com For help from Mailman with your account Put the word help in the subject or body of a blank message to: blind-computing-requ...@jaws-users.com Use the following address in order to contact the management team blind-computing-ow...@jaws-users.com If you wish to join the JAWS Users List send a blank email to the following address: jaws-users-list-j...@jaws-users.com