Thanks Ron, always good to have several options for doing this stuff.
Bill Stephan Kansas City, MO (816)803-2469 William Stephan -----Original Message----- From: "R & S Enterprises"<[EMAIL PROTECTED]> Sent: 8/24/06 4:51:25 PM To: "blindhandyman@yahoogroups.com"<blindhandyman@yahoogroups.com> Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws? The make a variety of guides the easiest being a 1 x 2 or 1 x 4 clamped down with two c clamps and use the left hand to make sure the circular saws left table edge runs tight against the guide board. Working slow and carefully you can make a straighter cut than pros using their eyes. The secret is keeping the saw tight against the guide. If the cut is real long you should be careful not to bend the board in the middle. Note some people use angle iron, alluminum strips etc. I happen to have a two piece aluminum jig that is two four foot plus sections that slide together to make it long enough to rip a 8 foot sheet of plywood.. There is a slot built in underneath that two clamps slide in. There has been some times when I put a screw in the middle to keep me from bending it by pushing the saw too hard against it. Ron ----- Original Message ----- From: "William Stephan" <[EMAIL PROTECTED]> To: <blindhandyman@yahoogroups.com> Sent: Thursday, August 24, 2006 12:20 PM Subject: Re: [BlindHandyMan] handheld circ saws was Compound Miter Saws? > Any of you folks have experience with handheld circular saws? Aside from the obvious danger factor, is it possible to build a guide so straight cuts can be made with one? > > Bill Stephan > Kansas City, MO > (816)803-2469 > William Stephan > > > -----Original Message----- > From: "John Schwery"<[EMAIL PROTECTED]> > Sent: 8/24/06 8:14:45 AM > To: "blindhandyman@yahoogroups.com"<blindhandyman@yahoogroups.com> > Subject: Re: [BlindHandyMan] Compound Miter Saws? > > Andy, line up the edge of the blade with your mark so the blade won't > cut away whatever you want to keep. Dale asked which is more > versatile, a table saw or miter saw. I have never used a miter saw > so I can't speak for those. It seems that one can't rip too easily > with a miter saw so I would think that would be one limitation for a > miter saw. So, in cross cutting, even though a miter saw may be more > convenient, that is why I went with a portable table saw. Also, I > don't have much space so I needed a saw that would store in a small space. > > earlier, Andy LaPointe, wrote: > >Hi, I would like to purchase a table miter saw to cut various > >things. I have never used one so, I would like to get everyone's > >opinion on how to use this > >or maybe some file with different info in it that will help me make > >a good decision. > >One question I have is how do I know where to place the piece to cut > >and know that the blade will cut along the marking that I made. I > >am sorry for such > >an elementary question but, this is probably the best place to > >ask. I guess you don't ask a car salesman how to read > >braille. Thank you for any time > >you give me. Andy. > > > > > >[Non-text portions of this message have been removed] > > > > > > > >To listen to the show archives go to link > > http://acbradio.org/handyman.html > >or > >ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > > >The Pod Cast address for the Blind Handy Man Show is. > >http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > > >The Pod Cast address for the Cooking In The Dark Show is. > >http://www.gcast.com/u/cookingindark/main.xml > > > >Visit The New Blind Handy Man Files Page To Review Contributions > > From Various List Members At The Following Address: > >http://www.jaws-users.com/handyman/ > >Visit the new archives page at the following address > >http://www.mail-archive.com/blindhandyman@yahoogroups.com/ > >For a complete list of email commands pertaining to the Blind Handy > >Man list just send a blank message to: > >[EMAIL PROTECTED] > >Yahoo! Groups Links > > > > > > > > > > John > > > > > To listen to the show archives go to link > http://acbradio.org/handyman.html > or > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > The Pod Cast address for the Blind Handy Man Show is. > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > The Pod Cast address for the Cooking In The Dark Show is. > http://www.gcast.com/u/cookingindark/main.xml > > Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: > http://www.jaws-users.com/handyman/ > Visit the new archives page at the following address > http://www.mail-archive.com/blindhandyman@yahoogroups.com/ > For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: > [EMAIL PROTECTED] > Yahoo! Groups Links > > > > > > > > > > To listen to the show archives go to link > http://acbradio.org/handyman.html > or > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > The Pod Cast address for the Blind Handy Man Show is. > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > The Pod Cast address for the Cooking In The Dark Show is. > http://www.gcast.com/u/cookingindark/main.xml > > Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: > http://www.jaws-users.com/handyman/ > Visit the new archives page at the following address > http://www.mail-archive.com/blindhandyman@yahoogroups.com/ > For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: > [EMAIL PROTECTED] > Yahoo! Groups Links > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.405 / Virus Database: 268.11.5/426 - Release Date: 8/23/06 > > To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/