Earlier today my wife checked the gauge and it indicated half full. I just 
went and used my nfb light sensor and about half way down the tube there was 
a significant change in pitch. I don't think that this sensor is as good as 
the science products one was. That had a much narrower window since the 
sencer was inside a very narrow tube. This one can give me a close guess but 
not enough to totally rely upon.
----- Original Message ----- 
From: "Lenny McHugh" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, December 04, 2007 2:46 PM
Subject: Re: [BlindHandyMan] heating oil fuel gage


Tom,
I have been pondering over that. Looking at mine my fill cap is outside. I
think that possibly the science products light sensor on a probe may work. I
no longer have one so I can't test the theory.  On my tank the float is
white in a clear tube. I would think that the light sensor on the probe
would notice the difference when it passed over the float area
I do have the NFB light sensor I will try that in the next day or so.
.
----- Original Message ----- 
From: "Tom Fowle" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, December 04, 2007 1:39 PM
Subject: Re: [BlindHandyMan] heating oil fuel gage


Is there a fill cap directly on top of the tanks?
If so, make up a stick a bit longer than the depth of the tank with a small
float
like a pingpong ball on its bottom.
Then open the fill cap and extend the stick down into the tank till the
float
hits the oil and you feel the resistance.
You might need help marking the stick to coordinate witht the gauge but that
should do it.

If the fill cap is up on ground level, I'll have to puzzle about that a bit.

Tom Fowle



To listen to the show archives go to link
 http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/

The Pod Cast address for the Blind Handy Man Show is.
http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

Visit The Blind Handy Man Files Page To Review Contributions From Various
List Members At The Following address:
http://www.jaws-users.com/handyman/

Visit the archives page at the following address
http://www.mail-archive.com/[email protected]/

If you would like to join the Blind Computing list, then visit the following
address for more information:
http://jaws-users.com/mailman/listinfo/blind-computing_jaws-users.com

For a complete list of email commands pertaining to the Blind Handy Man list
just send a blank message to:
[EMAIL PROTECTED]
Yahoo! Groups Links






To listen to the show archives go to link
 http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/

The Pod Cast address for the Blind Handy Man Show is.
http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

Visit The Blind Handy Man Files Page To Review Contributions From Various 
List Members At The Following address:
http://www.jaws-users.com/handyman/

Visit the archives page at the following address
http://www.mail-archive.com/[email protected]/

If you would like to join the Blind Computing list, then visit the following 
address for more information:
http://jaws-users.com/mailman/listinfo/blind-computing_jaws-users.com

For a complete list of email commands pertaining to the Blind Handy Man list 
just send a blank message to:
[EMAIL PROTECTED]
Yahoo! Groups Links




Reply via email to