Thanks, Tom -----Original Message----- From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Tom Hodges Sent: Saturday, October 11, 2008 9:22 PM To: blindhandyman@yahoogroups.com Subject: RE: [SPAM][BlindHandyMan] Switches and wattage
Tom, Here's a simple way to figure out how much you put on one circuit. The formula is watts divided by volts equals amps, or amps times volts equals watts. Also, you can put up to 80% on a circuit. For example, 15 amps times 120 volts equals 1800 watts times .80 (80%) equals 1440. So, you can put 1440 watts on a 15 amp circuit - just change the numbers around if you're using a 20 amp circuit. Thanks, Tom _____ From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Tom Vos Sent: Saturday, October 11, 2008 1:32 PM To: blindhandyman@yahoogroups.com Subject: [SPAM][BlindHandyMan] Switches and wattage I'm planning to install recessed lighting in my kitchen. There will be quite a bit more wattage burned over what I have now. Does anyone know if there is a maximum wattage I can put on a single switch? I think I'll have 9 or ten fixtures, and I don't know what size bulb the fixtures take since I haven't bought them yet. And does it matter if I use incandescent, halogen or flourescent bulbs? Blessings, Tom [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
