Hi Max It seems that you can seal off some cartridges with a nail or take off the nozzle place a piece of plastic over the nozzle and screw it back on .
The brother in law just leaves the nozzle full and clears the nozzle when next he uses it. Sometime it does not matter what method you use the stuf just goes off. You could try completely rapping the cartridge in cling rap thus excluding the air from sending it off. Ray From: [email protected] [mailto:[email protected]] On Behalf Of Agent86b Sent: Wednesday, 6 May 2009 12:12 PM To: [email protected] Subject: [BlindHandyMan] re sealing a gap filler tube Hi all, I wish to use a gap filler that is in a cartridge. It is a clean up with water product. After I have taken the cartridge out of the calking gun what do you all do in resealing the cartridge so you can use the rest of the tube later. I used to put a roofing nail back in silicon cartridges and that appeared to work ok. Thanks for any advice. Max. [Non-text portions of this message have been removed]
