rob and all,
this looks like a fancy somewhat programmable talking meter.
It is probably intended to be used with a variety of sensors, temperature,
pressure etc. which produce electrical current or voltage outputs.

Omega makes lots of such sensors.

The page can't be displayed on my browser, so I'll contact them
and find out more.  If I know Omega, it will not be at all cheap.

If any body else contacts them, for heavens sake do not under
any circumstances mention blindness.  They used to sell a good, if
costly, talking meter but took it off the market because they were afraid
of blind people suing them.

We'll buy one here and give it a run for it's money and report.

Thanks for bringing this to my attension, it may be very usefull when properly
combined with the appropriate sensors.

Tom Fowle
Embedded Systems Developer/ Rehab engineer
Rehabilitation Engineering Research Center
The Smith-Kettlewell Eye Research Institute
2318 Fillmore St.
San Francisco, CA 94115
415-345-2123 (Voice)
 fo...@ski.org
 
 
 
On Wed, Dec 09, 2009 at 04:25:48PM -0600, Rob Monitor wrote:
> HI, Would someone please explain just what this thing does.. Well I did look 
> at the web. site but I'm still not to clear what it does.. Maybe it's just 
> me from living up here in the frozen north just don't understand..
>     ROB FROM MINNESOTA----- Original Message ----- 
> From: "Lenny McHugh" <lmch...@verizon.net>
> To: "handyman-blind" <blindhandyman@yahoogroups.com>
> Sent: Tuesday, December 08, 2009 5:53 PM
> Subject: [BlindHandyMan] Universal Verbalizer OMEGASAYS®
> 
> 
> > Could this be adapted to some tools? The new UV1000 OMEGASAYS® universal
> > verbalizer is a handheld, process-signal to speech device that actually
> > talks! It can can verbalize 0 to 10 Vdc, 0 to 20 mA, and Type K 
> > thermocouple
> > inputs. Configure the verbalizer using the RS232 PC interface to specify 
> > the
> > input range, engineering scale, engineering unit, and high and low alarm
> > set-points. Select from over 100 engineering units while configuring the
> > verbalizer. The front keypad allows the user to select different inputs,
> > command talk, and adjust volume control. The UV1000 is a perfect solution
> > for verbalizing any type of control signal where a local display may not 
> > be
> > available.           TRY THE INTERACTIVE DEMO BELOW!
> >
> >      Specifications
> >      Voltage Input: 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc
> >      Current Input: 0 to 20 mA, 4 to 20 mA
> >      Analog Input Accuracy: 1% of full scale
> >      Thermocouple Input: Type K, SMP connection
> >      Thermocouple Range: -100 to 871°C (-148 to 1600°F)
> >      Thermocouple Input Accuracy: 2°C (3.6°F)
> >      Command/Continuous Talk: Set via slide switch
> >      High & Low Alarm Set Points: Set via RS232 PC interface
> >      Engineering Scale: Set via RS232 PC interface
> >      Engineering Unit: Set via RS232 PC interface
> >      Volume Control: Set via keypad, 8 levels at 4 dB intervals
> >      Power: 2 "AA" size batteries, or AC adaptor (both included)
> >      Power Indication: Red LED
> >      Low Battery Indication: Red LED, flashing
> >      Speech Sampling Rate: 8 KHz
> >      Speaker: Built-in, 8 O
> >      Battery Life:
> >         40 Hours: Continuous talking mode (alkaline battery)
> >         160 Hours: Continuous talking mode (lithium battery)
> >      Operating Ambient Temperature: 0 to 50°C (32 to 122°F)
> >      Operating Relative Humidity: 0 to 95% RH (non-condensing)
> >      Dimensions: 120 L x 76 W x 32 mm D (4.75 x 3 x 1.25")
> >      Weight: 250 g (0.55 lbs)
> >
> >
> >
> > http://www.omega.com/ppt/pptsc.asp?ref=UV1000
> >
> >
> >
> > ------------------------------------
> >
> > Send any questions regarding list management to:
> > blindhandyman-ow...@yahoogroups.com
> > To listen to the show archives go to link
> > http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
> > Or
> > ftp://ftp.acbradio.org/acbradio-archives/handyman/
> >
> > The Pod Cast address for the Blind Handy Man Show is.
> > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
> >
> > Visit The Blind Handy Man Files Page To Review Contributions From Various 
> > List Members At The Following address:
> > http://www.jaws-users.com/JAWS/handyman/
> >
> > Visit the archives page at the following address
> > http://www.mail-archive.com/blindhandyman@yahoogroups.com/
> >
> > If you would like to join the JAWS Users List, then visit the following 
> > address for more information:
> > http://www.jaws-users.com/
> > For a complete list of email commands pertaining to the Blind Handy Man 
> > list just send a blank message to:
> > blindhandyman-h...@yahoogroups.comyahoo! Groups Links
> >
> >
> >
> > 
> 
> 
> 
> ------------------------------------
> 
> Send any questions regarding list management to:
> blindhandyman-ow...@yahoogroups.com
> To listen to the show archives go to link
> http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
> Or
> ftp://ftp.acbradio.org/acbradio-archives/handyman/
> 
> The Pod Cast address for the Blind Handy Man Show is.
> http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
> 
> Visit The Blind Handy Man Files Page To Review Contributions From Various 
> List Members At The Following address:
> http://www.jaws-users.com/JAWS/handyman/
> 
> Visit the archives page at the following address
> http://www.mail-archive.com/blindhandyman@yahoogroups.com/  
> 
> If you would like to join the JAWS Users List, then visit the following 
> address for more information:
> http://www.jaws-users.com/
> For a complete list of email commands pertaining to the Blind Handy Man list 
> just send a blank message to:
> blindhandyman-h...@yahoogroups.comyahoo! Groups Links
> 
> 
> 

Reply via email to