I've not tried that, so can't reall give an answer. I suspect at some point a real router would become easier and safer to use.
-----Original Message----- From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Carl Sent: Tuesday, January 05, 2010 13:19 To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] roto zip cud'nt you use it like a router in that hav a pin on the side foloing an outline for makeing shapes? ----- Original Message ----- From: William Stephan To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Sent: Tuesday, January 05, 2010 7:10 PM Subject: RE: [BlindHandyMan] roto zip If you had enough eyesight to follow an outline, a rotozip would probably be fine. If not, it's not practical. The blades are not like drill bits, they're very sharp, and you can seriously mangle your fingers if they come into contact with the blade while it's spinning. -----Original Message----- From: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com [mailto:blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com] On Behalf Of Carl Sent: Tuesday, January 05, 2010 07:18 To: David Greenwood; blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Subject: [BlindHandyMan] roto zip hav any of you chaps had a play with a roto zip or spiral saw? how do thay handle? are thay manlie for cutting thin sheets like ply? [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]
