oh boy, corrected again. Sorry, Bob is right, thank you for putting it right.
On Tue, 19 Jan 2010, Bob Kennedy wrote: > Tite Bond #3 is water proof. But it still feels like regular wood glue. > > The parts you roll together is a type of epoxy and it depends on what you > are using glue for. That type of epoxy is very thick when mixed and it can > throw off the fit if you use it on wood. > ----- Original Message ----- > From: Spiro > To: [email protected] > Sent: Monday, January 18, 2010 11:01 PM > Subject: Re: [BlindHandyMan] glues > > > > you speak of plumber's puddy. > As you have discovered Gorilla glue is an urethane glue similar to the > acrylics of the super glue family. I like the Gorilla better for a water > tight wood glue. But I've been told of a better wood glue as of late. > I'll post and get back with it. > But, the plumber's epox if mixed right will hold crazy things together too > with more work time than super glue. > I've glued a metal plate onto the bac of my heat gun, as I have no hanging > hook for it. I've glued a flat plate onto a collar for use with my bottle > pump. > > On Mon, 18 Jan 2010, Geoff Eden wrote: > > > I may have misunderstood the glue discussion of some months ago. I > believed that gorilla glue was the type of blue that one needs in one's hands > to activate it. However, I may have been mistaken, is looking it up I note > that it is similar to superglue and comes out of a tube using moisture in the > air to start the hardening process. > > > > However, I do recall a discussion of a glue which one cut from a strip and > needed in one's hands. This looked tremendously practical to me, and I may > have inadvertently advise people on its proper name. Please, would somebody > give me the proper brand name of this glue. > > > > Gratefully > > > > Geoff > > > > [Non-text portions of this message have been removed] > > > > > > > > > [Non-text portions of this message have been removed] > >
