Hello, Could you please indicate your first name when posting? I am not comfortable speaking to anonymous and this list don't preserve senders' address.
You can increase swap, but I doubt that changes something as the system should need less RAM in console mode that in graphical mode, at least if you use startx to start mate. I will try to investigate on the sound issue, however I don't have USB speakers to try. Does the same issue occur if you use another page like most instead of less? About the installation logs, they go in /dev/tty4, that you can hear during installation typing Alt+F4 However, this is not very useful as you can't scroll. This is set in /etc/syslog.conf in the installer, so could be changed there. When the system is running the logs go partly in /var/log/syslog, partly in /var/log/messages, both are text files readable by root. You can also type as root dmesg|less or dmesg|most to check the messages from starting the system. Thanks for your reports so far. Greetings, Didier Le 03/01/2018 à 08:09, Linux for blind general discussion a écrit : > I just had an idea and it will take another slint install to test it. Could > swap partition size be under-stated for screen readers? I have a root > partition of 1996GB and a linux-swap partition of 4GB and available memory on > the machine ram is 1GB. I'll try taking the swap partition size up and see > if this problem goes away. > > On Wed, 3 Jan 2018, Linux for blind general discussion wrote: > >> Date: Wed, 3 Jan 2018 02:03:31 >> From: Linux for blind general discussion <[email protected]> >> To: Linux for blind general discussion <[email protected]> >> Subject: Re: slint release install findings >> >> When I ran the slint release earlier it was on only one set of speakers. >> Adding the usb speaker set to the system had no effect on speech output >> quality. >> >> On Wed, 3 Jan 2018, Linux for blind general discussion wrote: >> >>> Date: Wed, 3 Jan 2018 01:34:10 >>> From: Linux for blind general discussion <[email protected]> >>> To: [email protected] >>> Subject: slint release install findings >>> >>> speech in console mode with mate as default graphical user interface >>> dstarts sounding choked shortly after login. Speech in graphical mode >>> once startx gets run has no such problems. To reproduce just run less on >>> a document that's a few screens long and listen to the speech. flushing >>> speakup has very temporary improvement of speech before speech goes back >>> to sounding choked. >>> One thing that may be useful for slint in future is to have ability to >>> preserve installation logs which also detect hard I have two sets of >>> speakers on this computer and will try disconnecting usb speakers and see >>> if that helps speakup work better. >>> >>> >>> -- >>> >>> _______________________________________________ >>> Blinux-list mailing list >>> [email protected] >>> https://www.redhat.com/mailman/listinfo/blinux-list >>> >>> >> >> > _______________________________________________ Blinux-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/blinux-list
