Did some more looking on this server to determine what happened. On the ftp side I used FileZilla so I could see the responses and I am getting this:
Status: Connecting to wp.thenadd.org:21... Response: fzSftp started Command: open "naddmas...@wp.thenadd.org" 21 Error: Network error: Connection refused Error: Could not connect to server Also tried changing the password for one of the users to see if somehow the password table had gotten corrupted and that didnt help. > Michael > > Getting there! This worked, now I can get to the login, but it will not > let > me login, says You have not entered a correct username and/or password. > Please try again. No matter what I put in. > >> Hi Bill, > >>> Unfortunately that didnt work.When i used that it still kicks me to the >>> "Welcome and thank you" screen. If I use it on a different server >>> running >>> same version of Blue Onyx it works as you said it would. When I tried >>> clicking on the start button I can see it is going to loginHandler then >>> to >>> login then back to intro.html. >>> >>> Its almost as if when I was adding the new site some config file got >>> currupted. The new site i was adding used the same ip as an existing >>> site >>> on that server. >> >> That's fine. You can have as many sites on the same IP as you want. But >> only >> one of the sites is then allowed to use SSL certificates. >> >> Try this: >> >> Login as "admin" by SSH and "su -" to gain root access. >> >> Then run this programm: >> >> /usr/sausalito/bin/cceclient >> >> It will reply something like this: >> >> 100 CSCP/0.80 >> 200 READY >> >> Then type this inside that program and be sure to type it with the same >> upper >> and lower cases as shown in my examples: >> >> find System >> >> It will reply something like this: >> >> 104 OBJECT 3 >> 201 OK >> >> Note that it said that the object ID is 3. Yours may be different. Take a >> look >> at the object by using the "get" command. Be sure to use the object ID >> that >> the "find" command had reported: >> >> get 3 >> >> 102 DATA productBuild = "5108R" >> 102 DATA NAMESPACE = "" >> 102 DATA productIdentity = "20110922" >> 102 DATA CLASSVER = "1.2" >> 102 DATA isRegistered = "0" >> 102 DATA CLASS = "System" >> 102 DATA gateway = "192.0.2.1" >> 102 DATA serialNumber = "" >> 102 DATA domainname = "smd.net" >> 102 DATA productName = "BlueOnyx 5107R/5108R" >> 102 DATA productBuildString = "build 20110922 for a 5108R in en_US" >> 102 DATA isLicenseAccepted = "1" >> 102 DATA OID = "3" >> 102 DATA productLanguage = "de_DE" >> 102 DATA productSerialNumber = "" >> 102 DATA console = "1" >> 102 DATA productVendor = "" >> 102 DATA dns = "&192.168.2.1&" >> 102 DATA hostname = "5108r" >> 102 DATA locales = "&en_US&da_DK&de_DE&ja_JP&" >> 201 OK >> >> What we're looking for is this setting inside the "System" object: >> >> 102 DATA isLicenseAccepted = "1" >> >> In your case it is most likely set to "0" instead of "1". >> >> So do this (and be sure to replace the object number after the "set" with >> the >> object number that was reported to you during the "find" command: >> >> set 3 isLicenseAccepted = "1" >> >> If you typed that correctly, it will just reply back with this: >> >> 201 OK >> >> Press CTRL+C to exit cceclient. You should be able to get to the GUI now >> without seeing the "Start" page. >> >> -- >> With best regards >> >> Michael Stauber >> _______________________________________________ >> Blueonyx mailing list >> Blueonyx@mail.blueonyx.it >> http://mail.blueonyx.it/mailman/listinfo/blueonyx >> > > _______________________________________________ > Blueonyx mailing list > Blueonyx@mail.blueonyx.it > http://mail.blueonyx.it/mailman/listinfo/blueonyx > _______________________________________________ Blueonyx mailing list Blueonyx@mail.blueonyx.it http://mail.blueonyx.it/mailman/listinfo/blueonyx