On Sat, 22 Mar 2014 19:00:49 -0500, Michael Stauber <[email protected]> wrote: > Hi Will, > >> On my 5108R, I set up a site at a "temporary" IP >> (one of the last ones in my range) while the site owner configured it. >> Now they are ready to go live, so I want to move it down to the 'active' >> range where I keep all the production hosts. I'm in general settings and >> I switch the IP, as I have done numerous times before, even picking the >> IP from the autopopulate list in my browser. The IP has other domains >> hosted on it, so it is a valid IP on the box... but the GUI reports back >> The IP address 123.123.123.123 is not allowed. Please choose another IP >> address. >> >> Any thoughts as to why I can't change the IP? > > If that Vsite is *not* owned by "admin", then please check "IP Address > Allocation" and make sure the Vsite owner has access to both the old and > new IP address range. > > If the problem happens while the site is owned by "admin", then turn off > "IP address allocation" and try again. > > If the problem still persists, run "tail -f /var/log/messages" and try > again. Then post the relevant CCE messages from the logfile here.
Thanks Michael - the site was owned by admin - turning off IP Allocation got me through... but the IP I was setting it to was within the allocation range. Any thoughts on why having the allocation range set and trying to use an address within the range didn't work? --Will _______________________________________________ Blueonyx mailing list [email protected] http://mail.blueonyx.it/mailman/listinfo/blueonyx
