Hi Mike, You wrote: I've received my Sandisk SD cards from memorysuppliers in the mail yesterday. For those of you who have an Mpower, could you tell me, where exactly is the SD card slot? and if it should ever become necessary to do so, how do I switch the card from read/write to read only and back? Thanks
With the MPower's back panel facing toward you, locate the compactflash slot, then move to the right and you'll find the mini USB port. The SD card slot is below that port, almost at the bottom edge of the unit.
When you look at an SD card, you'll notice several things: it has a smooth surface which is a label, and the underside is somewhat rougher. One end of the card has a corner removed. The end that goes into the MPower first has ridges on the underside. So, orient the card so that its label faces upward and the cut corner is toward you and is to your left. Run your fingernail along the right edge of the card and you'll find a recessed area where the read/write switch is. You should be able to move that switch back and forth with your fingernail. To set the card so that it's writeable, move the switch toward you; to set it to read-only, move it to the rear of the card and make sure that it's snapped into place. Hope this helps.
Tom ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [email protected] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
