Hi,
Here are the directions for setting up the mPower to use as a braille
display with WindowEyes:
1. Plug the serial cable into your PC and your BN. If your PC doesn't have a
serial port, you'll need to use an adapter. Plug the serial cable into the
adapter and plug the usb connector into your PC.
2. Go into the WE control pannel by pressing control backslash.
3. Press alt f. Press b for braille displays.
4. Press b until you hear, "BrailleNote" or "BrailleNote with keyboard
input."
5. Press tab to get to the list box for the com ports.
6. You must know the com port you are connected to. If you're not sure,
you'll have to guess. Arrow through the list an try each com port until you
feel the braille dots under your fingers. When you have found the port you
want to use or try, press enter or tab to the ok button.
I hope these instructions are helpful. Let me know if you have questions.
Terri Amateur Radio call sign KF6CA.
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
