Hi William,
Thanks a bunch for getting back to me on this one. You nailed it; I thought
I had to pair the devices before going into terminal mode on the
BrailleNote. As you suggested, I invoked terminal mode first, then went
into the VoiceOver settings to turn Braille on. The iPhone told me that
bluetooth wasn't on and asked me if I wanted to do that, to which I replied
yes, then I entered 0000 and tapped Pair. Worked like a champ.
Now all I have to do is learn all the commands.
Thanks again.
Tom
----- Original Message -----
From: "William Walsh" <[email protected]>
To: "Tom Lange" <[email protected]>
Sent: Wednesday, April 06, 2011 10:31 AM
Subject: re: [Braillenote] Problem pairing Iphone and Apex
oad the driver, because the terminal mode changes keysoft and completely
disables most of its fauctionality, so OK. This comon mistake I will walk
you through. 1. Once bluetooth is on on both devices, make sure you are
in the BRAILLE terminal mode on your Apex. If not, this will not allow
the phone to load the driver. 2. Double tap the apex option.
3. What I would recomend doing erwhen the pair code comes up, is do a
four finger swipe down, to the bottom of the keyboard where ey is then
qquickly swipe your finger to the left where the 0 is and double tap it
four times really fast. Then, quickly, very quite quickly, fourfinger
swipe back up to the top and flick right real qlkly until you hit the pair
button. Then double tap it.
4. You should then hear a little beep sound from the phone, indicating
that your apex was successfuly paired, and then you should see everythiog
in braille. Tip about braille comands, in comands such as space with h.
for the home button, you first need to press enter with 4 5 6 first to buy
pass the keysoft help command, and then presss space with have. Also,
make sure you are running KS 9.1. This will ensure that you can enter
grace 2 braille. This is a free upgrade, and can be downloaded from the
humanware site. Go to: wwwhumanwarecom slash braille note under score
support.
Hope this helps.
Thanks,
Will
----- Original Message -----
From: "Tom Lange" <[email protected]
To: "BrailleNote List" <[email protected]
Date sent: Sun, 3 Apr 2011 17:54:04 -0700
Subject: [Braillenote] Problem pairing Iphone and Apex
Hey all,
I just got an Iphone 4 yesterday and am really enjoying learing about it,
along with Voiceover. While looking around at various places, I found a
list of common commands for using the Iphone with a Braille display, and
since the information said that I could pair it with my Apex I figured I'd
give it a shot.
On the iPhone, I went into General, turned bluetooth on, then went into
Accessibility, VoiceOver, then Braille. The iPhone found my Apex, and
when I attempted to pair the two machines, I had time-out problems because
I couldn't find the Pair button right away after entering 0000. Having
located the Pair button in a more timely fashion, I then tried again, but
the latest problem that I'm having is that the iPhone tells me that it
can't load the driver for the Apex.
Any ideas? I think it would be really cool to get this working.
Thanks.
Tom
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote