Hi Paul, I know Don has already spoken to this one but in our experience while testing, the connection would often drop even with the buffers turned off. Still, no harm can be done if you give this a go.
Dean. ----- Original Message ----- From: "Paul Henrichsen" <[EMAIL PROTECTED]> To: "Braillenote List" <[EMAIL PROTECTED]> Sent: Wednesday, December 24, 2003 1:26 PM Subject: Re: [Braillenote] ActiveSync > Hi, Dean. Do you need to turn off fifo buffers in the advanced settings for > your com port or can you leave it on? > At 12/22/2003, you wrote: > > > >Hi Wayne, > > > >The speed is changed on the BrailleNote in the utilities menu under > >miscilanious options. > > > >The hserial option is rated at 115.2 k. The serial option is the default I > >mentioned and the Lserial option is the 19.2 k. > > > >Hope this helps. > > > >Dean. > > > >----- Original Message ----- > >From: "Wayne Merritt" <[EMAIL PROTECTED]> > >To: "Braillenote List" <[EMAIL PROTECTED]> > >Sent: Tuesday, December 23, 2003 5:15 PM > >Subject: Re: [Braillenote] ActiveSync > > > > > > > Where is this speed setting found, either in the BrailleNote or on the PC? > > > > > > Wayne > > > www.wayneism.com > > > ----- Original Message ----- > > > From: "Dean Jackson" <[EMAIL PROTECTED]> > > > To: "Braillenote List" <[EMAIL PROTECTED]> > > > Sent: Sunday, December 21, 2003 8:38 PM > > > Subject: [Braillenote] ActiveSync > > > > > > > > > > > > > > Hello all, > > > > > > > > Recently, there has been some conversation on the list about using > > > > ActiveSync with the BrailleNote. Let me try and answer the queries from > > > > list members. > > > > > > > > Firstly, remember that the com port baud rate in Windows is not meant > >to > > > be > > > > set to the actual speed that you're connecting at, rather, it is a > >maximum > > > > speed. So, as long as the maximum speed is not set below the speed at > > > which > > > > you're trying to connect to the PC, you should be fine. Therefore, you > > > > should not need to touch the port settings at all. > > > > > > > > Secondly to clarify a point, in KeySoft 4.01 and below, there are two > > > rates > > > > at which you can connect to ActiveSync. They are 115.2 kbps (the > > > default), > > > > and 19.2 kbps. In KeySoft 5 however, those two rates are still > >available, > > > > but we've added a third rate which is by the way, also the default. Now > > > you > > > > can connect at 57.6 kbps. > > > > > > > > If you have any further queries, please don't hesitate to contact me. > > > > > > > > Regards, > > > > > > > > Dean Jackson > > > > Customer/Technical Analyst > > > > Pulse Data International Ltd. > > > > > > > > DDI: +64 3 373 6184 > > > > Fax: +64-3-384 4933 > > > > Email: > > > > [EMAIL PROTECTED] > > > > Internet: > > > > www.pulsedata.com > > > > __________________________ > > > > > > > > > > > > ___ > > > > To leave the BrailleNote list, send a blank message to > > > > [EMAIL PROTECTED] > > > > To view the list archives or change your preferences, visit > > > > http://list.pulsedata.com/mailman/listinfo/braillenote > > > > > > > > > > > > > > > > > > > > ___ > > > To leave the BrailleNote list, send a blank message to > > > [EMAIL PROTECTED] > > > To view the list archives or change your preferences, visit > > > http://list.pulsedata.com/mailman/listinfo/braillenote > > > > > > > > >___ > >To leave the BrailleNote list, send a blank message to > >[EMAIL PROTECTED] > >To view the list archives or change your preferences, visit > >http://list.pulsedata.com/mailman/listinfo/braillenote > > Paul Henrichsen > <[EMAIL PROTECTED]> > <home.pacbell.net/paulh52> > > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.pulsedata.com/mailman/listinfo/braillenote >
